Ford 2003 Explorer v.4 Manuel d'utilisateur télécharger pdf (Page 178)

Hitches

Do not use hitches that clamp onto the vehicle bumper. Use a load

carrying hitch. You must distribute the load in your trailer so that

10–15% of the total weight of the trailer is on the tongue.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers

of the vehicle hitch. To connect the trailer’s safety chains, cross the

chains under the trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency

gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are

safe if installed properly and adjusted to the manufacturer’s

specifications. The trailer brakes must meet local and Federal

regulations.

Do not connect a trailer’s hydraulic brake system directly to your

vehicle’s brake system. Your vehicle may not have enough

braking power and your chances of having a collision greatly increase.

The braking system of the tow vehicle is rated for operation at the

GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure your

trailer lamps conform to local and Federal regulations. See your dealer or

trailer rental agency for proper instructions and equipment for hooking

up trailer lamps.

Never connect any trailer lighting to the vehicle’s taillamp

circuits, because it may damage the electrical system resulting in

fire. Contact your local Ford dealership for assistance in proper trailer

tow wiring installation. Additional electrical equipment may be

required.

Driving

178

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.4 Manuel d'utilisateur Page 178