Ford 2003 Explorer v.3 Manuel d'utilisateur télécharger pdf (Page 254)

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid. Refer to the scheduled maintenance

guide for the service interval schedules. If adding fluid is necessary, use

only MERCONt ATF.

• 4.0L SOHC V6 engine

• 4.6L V8 engine

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be

near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir.

5. The fluid level should be between the MIN and MAX lines. Do not add

fluid if the level is in this range.

6. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the correct operating range. Be sure to put the

cap back on the reservoir.

Maintenance and Specifications

254

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.3 Manuel d'utilisateur Page 254