Ford 2002 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 272)

Fluid Ford Part

Name

Application Capacity

Rear axle

lubricant

Motorcraft

SAE 80W-90

Premium Rear

Axle Lubricant

All 2.4-2.5L

(5.0-5.3 pints)

Windshield

washer fluid

Ultra-Clear

Windshield

Washer

Concentrate

All 2.6L

(2.75 quarts)

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick or on the dipstick

handle. MERCONt and MERCONt V are not interchangeable. DO NOT

mix MERCONt and MERCONtV. Refer to the scheduled maintenance

guide to determine the correct service interval.

Indicates only approximate dry-fill capacity. Some applications may vary

based on cooler size and if equipped with an in-tank cooler. The amount

of transmission fluid and fluid level should be set by the indication on

the dipstick’s normal operating range.

Service refill capacity for the manual transmission is determined by

filling the transmission to the bottom of the filler hole with the vehicle

on a level surface.

Add the coolant type originally equipped in your vehicle.

Traction-Lok axles use 2.2–2.4L (4.75–5.0 pints) of rear axle lubricant.

Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or

equivalent meeting Ford specification EST-M2C118–A for complete refill

of Traction-Lok axles.

Service refill capacities are determined by filling the rear axle 6 mm to

14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.

Maintenance and Specifications

272

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 287 288

Pas de commentaire

Ford 2002 Ranger v.2 Manuel d'utilisateur Page 272