Ford 2002 Mustang Manuel d'utilisateur télécharger pdf (Page 206)

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should

be checked at the mileage intervals in the scheduled

maintenance guide. The coolant concentration

should be maintained at 50/50 coolant and water,

which equates to a freeze point of -36° C (-34° F).

Coolant concentration testing is possible with a

hydrometer or antifreeze tester (such as the

Rotunda Battery and Antifreeze Tester, 014–R1060).

The level of coolant should be maintained at the

“cold full” of “cold fill range” level in the coolant

reservoir. If the level falls below, add coolant per the

instructions in the Adding Engine Coolant section.

Your vehicle was factory-filled with a 50/50 engine

coolant and water concentration. If the

concentration of coolant falls below 40% or above

60%, the engine parts could become damaged or not

work properly. A 50–50 mixture of coolant and

water provides the following:

• freeze protection down to -36° C (-34° F)

• boiling protection up to 129° C (265° F)

• protection against rust and other forms of

corrosion

• enables calibrated gages to function properly

• 3.8L OHV V6 engine

Maintenance and Specifications

206

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 255 256

Pas de commentaire

Ford 2002 Mustang Manuel d'utilisateur Page 206