Ford 2002 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 112)

If you wish to erase your personal code, use the following instructions:

Erasing personal code

1. Enter factory set code.

2. Press 1/2 control within five

seconds of step one.

3. Press 7/8 control and 9/0 control

at the same time within five seconds

of step 2.

The system will now only respond

to the factory set code.

Anti-scan feature

The keyless entry pad is disabled for

1 minute after 7 unsuccessful

attempts at entering a valid key

code. The keypad will flash during

this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the

vehicle.

Anti-scan will be turned off after:

• one minute of keypad inactivity.

• the remote entry transmitter UNLOCK button is pressed.

• the ignition is turned to the ON position.

Unlocking the doors with the keyless entry system

To unlock the driver door, enter either the factory set code or the

personal code (each digit must be pressed within five seconds of the

prior digit). The interior lamps will also illuminate.

To unlock all doors, enter the factory set code or personal code (driver

door unlocks) and press the 3/4 control within five seconds.

Locking the doors with the keyless entry system

It is not necessary to enter the factory or personal code prior to locking

all doors. To lock the doors:

• Press the 7/8 control and the 9/0 control at the same time.

Activating/deactivating autolock with the keyless entry system

Before following the activation or deactivation procedures, make sure

that the anti-theft system (if equipped) is not armed, ignition is off, and

all vehicle doors and liftgate window are closed.

1 2

45678

1 2

45678

Locks and Security

112

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 311 312

Pas de commentaire

Ford 2002 F-150 v.2 Manuel d'utilisateur Page 112