Ford 1998 Mustang Manuel d'utilisateur télécharger pdf (Page 82)

10. Try to pull the belt out of the retractor to make

sure the retractor is in the automatic locking mode

(you should not be able to pull more belt out). If the

retractor is not locked, unbuckle the belt and repeat

steps two through nine.

Check to make sure the child seat is properly

secured before each use.

Attaching safety seats with tether straps

Some manufacturers make safety seats that include

a tether strap that goes over the back of the vehicle

seat and attaches to an anchoring point. Other

manufacturers offer the tether strap as an accessory.

Contact the manufacturer of your child safety seat

for information about ordering a tether strap.

Tether anchorage hardware

Attachment holes (at each rear seating position)

have been provided in your vehicle to attach anchor

hardware, if required. Tether anchorage hardware

kits (part number 613D74) including instructions,

may be obtained at no charge from any Ford or

Lincoln-Mercury dealer. All vehicles built for sale in

Canada include a tether anchor hardware kit.

Be sure to follow the child safety seat

manufacturer’s instructions.

Tighten the anchor according to

specifications. Otherwise, the safety seat

may not be properly secured and the child may be

injured in a sudden stop or collision.

Seating and safety restraints

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 191 192

Pas de commentaire

Ford 1998 Mustang Manuel d'utilisateur Page 82