Ford 1998 Expedition Manuel d'utilisateur télécharger pdf (Page 191)

1. Remove the four screws that

secure the high-mount brakelamp

lens.

2. Carefully remove the lens.

3. Each of the three bulbs may be

removed with a

⁄

turn

counterclockwise and a careful

pull.

4. Replace the bulbs as needed and

replace the high-mount brakelamp

lens.

Replacing tail lamp/backup

lamp bulbs

The tail lamp/backup lamp

assemblies are located in the same

portion of the vehicle rear, one just

below the other. Follow the same

steps to replace either bulb:

1. Open the liftgate to expose the

lamp assemblies.

2. Remove the two screws at the

top of the lens.

3. Carefully pop the lens off and to

the right (it may be necessary to

use a screwdriver to remove the

lens).

4. Twist the connector

⁄

turn

counterclockwise and pull it out

for replacement.

5. Pull the bulb straight out of the

recess and replace it.

6. Replace the lens and secure the

two screws.

Maintenance and care

191

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 215 216

Pas de commentaire

Ford 1998 Expedition Manuel d'utilisateur Page 191