Ford explorer Manuel d'utilisateur télécharger pdf (Page 319)

100

101

Adding Engine Oil

Note: Do not remove the filler cap when the engine is running.

Note: Do not add engine oil further than the MAX mark. Oil levels above

the MAX mark may cause engine damage.

Only use oils certified for gasoline engines by the

American Petroleum Institute (API). An oil with this

trademark symbol conforms to the current engine

and emission system protection standards and fuel

economy requirements of the International Lubricants

Specification Advisory Council (ILSAC), comprised of

U.S. and Japanese automobile manufacturers.

1. Remove the filler cap.

2. Add engine oil that meets Ford specifications. See Capacities and

Specifications for more information.

3. Replace the filler cap. Turn it until you feel a strong resistance.

ENGINE COOLANT CHECK

Checking the Engine Coolant

The concentration and level of engine coolant should be checked at the

intervals listed in scheduled maintenance information.

WARNING: Do not allow the fluid to touch your skin or eyes.

If this happens, rinse the affected areas immediately with plenty

of water and contact your doctor.

WARNING: Make sure that the level is within the COLD FILL

RANGE.

Make sure that the level is at the FULL COLD level or within the COLD

FILL RANGE in the coolant reservoir.

Coolant expands when it is hot. The level may extend beyond the COLD

FILL RANGE.

If the level is below the COLD FILL RANGE, add coolant immediately.

The coolant concentration should be maintained within 48% to 50%, which

equates to a freeze point between -30 °F (-34 °C) and -34 °F (-37 °C).

318 Maintenance

2014 Explorer (exp)

Owners Guide gf, 1st Printing, April 2013

USA (fus)

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 585 586

Commentaires sur ces manuels

Pas de commentaire

Ford explorer Manuel d'utilisateur Page 319

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford explorer