Ford 2014 Fiesta v.3 Manuel d'utilisateur télécharger pdf (Page 70)

GENERAL INFORMATION

Condensation in Lamp Assemblies

Exterior lamps have vents to

accommodate normal changes in air

pressure.

Condensation can be a natural by-product

of this design. When moist air enters the

lamp assembly through the vents, there is

a possibility that condensation can occur

when the temperature is cold. When

normal condensation occurs, a fine mist

can form on the interior of the lens. The

fine mist eventually clears and exits

through the vents during normal operation.

Clearing time may take as long as 48 hours

under dry weather conditions.

Examples of acceptable condensation are:

• The presence of a fine mist (no streaks,

drip marks or large droplets).

• A fine mist covers less than 50% of the

lens.

Examples of unacceptable condensation

are:

• A water puddle inside the lamp.

• Streaks, drip marks or large droplets

present on the interior of the lens.

If you see any unacceptable condensation,

have your vehicle checked by an authorized

dealer.

LIGHTING CONTROL

Lighting Control Positions

E156651

A

B

C

OffA

Parking lamps, instrument panel

lamps, license plate lamps and

tail lamps

B

HeadlampsC

Parking Lamps

Note: Prolonged use of the parking lamps

when the ignition is off will cause the battery

to run out of charge.

To operate the parking lamps turn the

lighting control to position B. The parking

lamps operate with the ignition on or off.

67

Fiesta (CCT) Vehicles Built From: 11-10-2013, Vehicles Built Up To: 31-12-2013

Lighting

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 399 400

Commentaires sur ces manuels

Pas de commentaire