Ford AM/FM stereo Manuel d'utilisateur télécharger pdf (Page 73)

Replacing lost remote entry transmitters

If you would like to have your remote entry transmitter reprogrammed

because you lost one, or would like to buy additional remote entry

transmitters, you can either reprogram them yourself, or take all

remote entry transmitters to your authorized dealer for

reprogramming.

How to reprogram your remote entry transmitters

You must have all remote entry transmitters (maximum of four)

available before beginning this procedure.

To reprogram the remote entry

transmitters:

1. Place the key in the ignition and

turn from the (2) LOCK position to

(3) OFF.

2. Cycle eight times rapidly (within

10 seconds) between the (3) OFF

position and (4) ON. Note: The

eighth turn must end in the (4) ON

position.

3. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

4. Within 20 seconds press any button on the remote entry transmitter.

Note: If more than 20 seconds have passed you will need to start the

procedure over again.

5. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

6. Repeat Steps 4 and 5 to program each additional remote entry

transmitter (up to four transmitters).

7. Turn the ignition to the (3) OFF position after you have finished

programming all of the remote entry transmitters.

8. The doors will lock, then unlock, to confirm that the programming

mode has been exited.

2004 Econoline (eco)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 247 248

Ford AM/FM stereo Manuel d'utilisateur Page 73