Ford AM/FM stereo Manuel d'utilisateur télécharger pdf (Page 115)

keeping the brakes from locking. Noise from the ABS pump motor and

brake pedal pulsation may be observed during ABS braking; this is

normal and should be no reason for concern.

ABS warning lamp

The ABS lamp in the instrument

cluster momentarily illuminates

when the ignition is turned on. If

the light does not illuminate during

start up, remains on or flashes, the

ABS may be disabled and may need to be serviced.

Even when the ABS is disabled,

normal braking is still effective. (If

your BRAKE warning lamp

illuminates with the parking brake

released, have your brake system serviced immediately.)

Using ABS

When hard braking is required, apply continuous force on the brake

pedal; do not pump the brake pedal since this will reduce the

effectiveness of the ABS and will increase your vehicle’s stopping

distance. The ABS will be activated immediately, allowing you to retain

full steering control during hard braking and on slippery surfaces.

However, the ABS does not decrease stopping distance.

Parking brake

To set the parking brake (1), press

the parking brake pedal down until

the pedal stops.

To release, pull the lever (2).

Always set the parking

brake fully and make sure

that the gearshift is securely

latched in P (Park).

The BRAKE warning lamp will

illuminate and will remain

illuminated until the parking brake

is released.

ABS

2004 Econoline (eco)

Owners Guide (post-2002-fmt)

USA English (fus)

Driving

115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 247 248

Ford AM/FM stereo Manuel d'utilisateur Page 115