Ford FCSD TECHNICAL TRAINING FCS-14000-DL Manuel d'utilisateur télécharger pdf (Page 71)

LESSON 3: POWERTRAIN

Installing the Bearing Caps

Install the camshaft bearing caps in the reverse order of removal.

NOTE: The camshaft bearing caps must be installed in their original locations.

The front thrust cap should be installed last to prevent the cap from breaking.

Next, install the phaser bolt by hand. Remove the timing chain wedge. Rotate the crankshaft pulley

counter-clockwise back to the 12 o’clock position.

NOTE: Tighten the phaser bolt to 40 Nm (30 lb-ft), plus 90 degrees.

2005 Expedition/Navigator New Model Technician Training 02-SEP-04 3-35

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 115 116

Pas de commentaire

Ford FCSD TECHNICAL TRAINING FCS-14000-DL Manuel d'utilisateur Page 71