Ford FCSD TECHNICAL TRAINING FCS-14000-DL Manuel d'utilisateur télécharger pdf (Page 55)

LESSON 3: POWERTRAIN

VCT Solenoid Removal

The VCT solenoid is serviced separately from the VCT valve body. No special tools are needed to remove the

solenoid. The retaining bolt is captured in the mounting tab.

1. Disconnect the solenoid electrical connection.

2. Remove the valve cover grommet.

3. Remove the hold-down bolt.

4. Remove the solenoid.

CAUTION: Do not drop the solenoid screw into the front cover. If the screw drops into the front

cover, the front cover must be removed to retrieve the screw. Do not use power tools to remove the

screw.

CAUTION: Use care to prevent contamination from falling in the valve body spool bore. Thoroughly

clean around cam cover and solenoid seal before removing the seal and solenoid.

2005 Expedition/Navigator New Model Technician Training 02-SEP-04 3-19

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 115 116

Pas de commentaire

Ford FCSD TECHNICAL TRAINING FCS-14000-DL Manuel d'utilisateur Page 55