Ford F-150 K8285 Manuel d'utilisateur télécharger pdf (Page 10)

K8285a-0920

• Align the hole in the steering wheel with the hole in the

steering column.

• Insert the .25" x 2.85" pin all the way through the hole in the side

of the steering wheel and into the steering column, as shown.

• “Snap” the steering wheel cover onto the steering wheel.

Hint: If the steering wheel cover does not "snap" onto the steering

wheel, you have not properly assembled the steering column to the

steering wheel. Remove the pin and the steering column from the

steering wheel and refer back to Assembly steps 5 and 6.

• Insert the end of the steering column down through the opening in

the dash and down through the hole in the vehicle floor.

Hint: You may need to turn the steering column to fit it through

both openings.

• Press the steering wheel down to "snap" into place.

.25" x 2.85" Pin

Steering Column

PRESS

Steering Wheel Cover

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Pas de commentaire

Ford F-150 K8285 Manuel d'utilisateur Page 10