Ford C3493 Manuel d'utilisateur télécharger pdf (Page 9)

C3493pr-0921

BATTERY CHARGING

C3493pr-0921

Battery

Connector

Charger

Connector

• Plug the charger connector into the battery connector

• Plug the charger into a standard wall outlet

Note: If power flow to the wall outlet is controlled by a switch, make

sure the switch is “ON”.

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

• Recharge the battery for at least 14 hours after each use of your

vehicle. Do not charge the battery longer than 30 hours.

• Once the battery is charged, disconnect the battery connector from

the charger connector. Unplug the charger from the wall outlet. The

battery is now ready to be installed in your vehicle. Please see the

Battery Installation section on page 20 for detailed instructions on

installing your battery. If your battery is already installed in your

vehicle, simply re-connect the motor harness connector to the battery.

WARNING

Children can be harmed by small parts,

sharp edges and sharp points in the

vehicle's unassembled state, or by electrical

items. Care should be taken in unpacking

and assembly of the vehicle. Children should

not handle parts, including the battery, or

help in assembly of the vehicle.

ASSEMBLY

• Place a .437 cap nut on a flat surface, inside up.

• Fit the end of the rear axle into the cap nut.

• Tap the opposite end of the rear axle with a hammer to secure the

cap nut on the rear axle. Pull on the cap nut to be sure it’s secure.

Rear Axle

.437 Cap Nut

.437"

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Pas de commentaire

Ford C3493 Manuel d'utilisateur Page 9