Ford SUPER DUTY F-SERIES 6C34-19A268-BA Manuel d'utilisateur télécharger pdf (Page 26)

F-SERIES (March, 2005)24

301 (Continued)

301 Canadian Requirements:

The Canadian loading requirements are provided in

Section 3.3 of Test Method 301 Fuel System Integrity,

revised: February 8, 2001, and should be substituted

wherever references to FMVSS 301 Section 7.1.6,

loading requirements have been made in the statements

of conformity for Standard 301.

302 The statement below is applicable to the Chassis

Cab:

This vehicle, when completed, will conform with

Standard 302, Flammability of Interior Materials, if no

alterations are made to those components covered by

the Standard which are installed by Ford Motor Company

and all components covered by Standard 302, which are

added to the incomplete vehicle by subsequent stage

manufacturers meet the ﬂammability requirements of

the Standard.

1106 Canadian Requirements:

The statements below are applicable to the Chassis

Cab with GVW ratings of 4536 kg [10,000 lb] or less:

These vehicles, when completed, will conform to

Standard 1106, Noise Emissions, Section 2, if noise

control devices or elements of design are not modiﬁed

removed or rendered inoperative. Examples of such

devices or elements of design are:

• Fender apron absorbers, fender apron barriers,

underbody noise shields and acoustic absorption

material.

• Engine speed governor or electronic control intended

to control maximum engine speed.

• Engine air duct, air intake choke or silencer, air cleaner

and air cleaner element.

• Exhaust system components including the catalyst

inlet pipe, mufﬂer, outlet pipe, resonator and diffuser.

• Engine cooling fan and cooling fan clutch.

1106 Canadian Requirements:

The statements below are applicable to the Chassis

Cab with GVW ratings of more than 4536 kg [10,000

lb]:

These vehicles, when completed, will conform to

Standard 1106, Noise Emissions, Section 4, if noise