Ford SUPER DUTY F-SERIES 6C34-19A268-BA Manuel d'utilisateur télécharger pdf (Page 17)

15F-SERIES (March, 2005)

110 U.S. Requirements:

The statement below is applicable to all incomplete

vehicles with a GVWR of 4536 kg [10,000 lbs] or less

with a completion date starting 09/01/2005:

This incomplete vehicle does not comply to FMVSS

110. In order to comply, the ﬁnal stage manufacturer

must permanently afﬁx a tire placard as speciﬁed in

paragraph S4.3 of FMVSS 110, typically to the driver’s

side B-pillar. See below for placard content and note

color and format requirements in S4.3.

115 Canadian Requirements:

The statements for Part 565.4 are appropriate compliance

representations for CMVSS 115, Vehicle Identiﬁcation

Number, if this incomplete vehicle was manufactured for

sale or use in Canada.

116 The statement below is applicable to the Chassis

Cab:

This vehicle, when completed, will conform to Standard

116, Motor Vehicle Brake Fluids, so long as any

brake ﬂuid added or replaced conforms to the DOT 3

speciﬁcations of the standard and contaminants are not

introduced into the hydraulic brake system.

118 The statement below is applicable to the Chassis Cab

not equipped with power operated windows, partition

or roof panel systems and their actuation devices

when completed as either a MPV or a Truck with a

GVWR of 4536 kg [10,000 lb] or less:

Conformity with Standard 118, Power Operated

Window, Partition, and Roof Panel Systems, is not

substantially affected by the design of this incomplete

vehicle; accordingly, Ford Motor Company makes no

representation as to conformity with this Standard. If any

power operated window, partition, or roof panel systems

are installed by subsequent stage manufacturers, they

must conform to the requirements of Standard 118.

118 The statement below is applicable to the Chassis Cab

equipped with power operated windows, partition or

roof panel systems and their actuation devices when

completed as either a MPV or a Truck with a GVWR of

4536 kg [10,000 lb] or less:

This vehicle, when completed, will conform to Standard

118, Power Operated Window, Partition, and Roof Panel

Systems, if the power operated windows, motors, wiring,

and key and switch activation systems, where provided

by Ford Motor Company, are not removed, relocated,

altered, or modified in any way. If additional power

operated window, partition, or roof panel systems are

installed by subsequent stage manufacturers, they must

conform to the requirements of Standard 118.

119 The statement below is applicable to the Chassis

Cab:

All tires supplied by Ford Motor Company are in full

conformity with Standard 119, New Pneumatic Tires for

Vehicles Other than Passenger Cars.

If additional tires are installed or the existing tires are

replaced by subsequent stage manufacturers, they must

conform to the requirements of Standard 119.

120 The statement below is applicable to the Chassis

Cab:

This vehicle, when completed, will conform to the tire

and rim selection requirements of Standard 120, Tire

Selection and Rims for Motor Vehicles Other Than

Passenger Cars, if the tire and rim assemblies and the

Incomplete Vehicle Information label that is afﬁxed to the

vehicle are not removed, altered, or replaced.

STATEMENTS OF CONFORMITY

T125/70D15

TIRE AND LOAD INFORMATION

SEE OWNERS MANUAL FOR ADDITIONAL INFORMATION

The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.

COMPACT TIRE SIZE

COLD TIRE INFLATION PRESSURE

420KPA, 60PSI

SEATING CAPACITY

FRONT: 2 REAR: 3TOTAL : 5

FRONT

REAR

ORIGINAL TIRE SIZE

COLD TIRE INFLATION PRESSURE

FRONT

REAR

P195 / 70R14

200KPA, 29PSI

111 The statement below is applicable to the Chassis Cab

when not equipped with outside mirrors:

Conformity with Standard 111, Rearview Mirrors, is not

substantially affected by the design of this incomplete

vehicle; accordingly, Ford Motor Company makes no

representation as to conformity with this Standard.

111 The statements below are applicable to the Chassis

Cab when equipped with a ﬂat glass mirror on the

passenger-side:

This vehicle, when completed, will conform to Standard

111, Rearview Mirrors, if:

• The mirrors and their mounts as supplied by Ford

Motor Company are not removed, relocated, replaced,

or altered.

• No structural modiﬁcations are made to the body which

would affect the stability of the mirror mounts.

• Any modiﬁcations or additions made to the incomplete

vehicle must not adversely affect the driver’s view to

the rear in the outside mirrors along both sides of the

vehicle.

113 The statement below is applicable to the Chassis

Cab:

This vehicle, when completed, will conform to Standard

113, Hood Latch Systems, if the hood latch system as

provided by Ford Motor Company is not removed or

altered.

114 The statements below are applicable to the Chassis

Cab when completed as either a MPV or a Truck with

a GVWR of 4536 kg [10,000 lb] or less:

This vehicle, when completed, will conform to Standard

114, Theft Protection, if the following components, to

the extent provided by Ford Motor Company, are not

removed, relocated, altered, or modiﬁed in any way:

• Steering column locking mechanism system

• Ignition key/transmission shift interlock locking

system

• Ignition key-locking system

• Key warning buzzer system

If any of the above components are added to the

vehicle they must conform to the requirements of this

Standard.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ford SUPER DUTY F-SERIES 6C34-19A268-BA Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford SUPER DUTY F-SERIES 6C34-19A268-BA