Ford SUPER DUTY F-SERIES 6C34-19A268-BA Manuel d'utilisateur télécharger pdf (Page 16)

F-SERIES (March, 2005)14

108 The statements below are applicable to the Chassis

Cab:

This vehicle, when completed, will conform to Standard

108, Lamps, Reflective Devices, and Associated

Equipment, if all the required lighting equipment as

indicated in Table H on this page (identiﬁed by the codes

R and S) is designed and installed in accordance with

the requirements of Standard 108 and the directions

contained in this statement. Additionally, if the completed

vehicle overall length is 9.14 meters [30 feet] or more,

intermediate side marker lamps and reﬂex reﬂectors (not

supplied by Ford Motor Company) are also required for

compliance with Standard 108.

The items of equipment which are supplied by Ford Motor

Company (identiﬁed by the code S in Table H, on this

page) are designed and installed to conform to all the

requirements of Standard 108. The completed vehicle will

conform with these components if the subsequent stage

manufacturer does not remove, relocate, alter, or modify

such equipment or modify the power supply or wiring to

such equipment, and does not complete the body in such

a conﬁguration as to impair the visibility and conformity

to the photometric requirements of the installed lamps

and reﬂective devices.

Specific requirements for lighting and associated

equipment are listed by incomplete vehicle type in Table

H on this page.

Lamps, reﬂective devices, and associated equipment

necessary to complete the vehicle from an incomplete

vehicle must conform to the equipment, locations,

special wiring, visibility, photometric, and performance

requirements of Standard 108 and to the applicable

SAE standards or recommended practices referenced

or sub-referenced in this Standard.

All electrical equipment added to the vehicle by

subsequent stage manufacturers must conform to the

wiring practices set forth in the Electrical Wiring Section

of the Ford Truck Body Builders Layout Book.

108 Canadian Requirements:

The preceding statements for Standard 108 are

appropriate compliance representations for CMVSS 108,

Lighting, and CMVSS 108.1, Headlamps, if this vehicle is

manufactured for sale or use in Canada, provided:

• No component of the Daytime Running Lamp (DRL)

system is removed, relocated, or modiﬁed.

STATEMENTS OF CONFORMITY

TABLE H

Standard 108 Lighting Equipment

Super Duty

F-Series

Completed

as Truck

or MPV

Headlamps S S

Tail Lamps S S

Stop Lamps S S

Center High Mounted

Stop Lamp (CHMSL) S N

License Plate Lamps S S

Reﬂex Reﬂectors – Side Front S S

– Side Rear R R

– Rear S S

Side Marker Lamps – Front S S

– Rear R R

Back-Up Lamps S S

Turn Signal Lamps – Front S S

– Rear S S

Turn Signal Operating Unit S S

Turn Signal Flasher (2) S S

Vehicular Hazard Warning Signal

Operating Unit S S

Vehicular Hazard Warning Signal

Flasher S S

Identiﬁcation Lamps – Front N(1) S(1)

– Rear N R

Clearance Lamps – Front N(1) S(3)

– Rear N R

Parking Lamps S N

S Required on completed vehicle and supplied with the

incomplete vehicle.

R Required on completed vehicle and not supplied with the

incomplete vehicle.

N Not required for completed vehicle.

(1) Supplied on DRW Super Duty F-Series Chassis Cab.

Optional on SRW Super Duty F-Series Chassis Cab.

(2) Designed for two turn signal lamps per vehicle side (one front

and rear). If additional lamps are required, replace the turn

signal ﬂasher with one having the correct lamp load rating.

(3) If a second unit body width is greater than 2032 mm [80 in] or

higher than the chassis cab body, additional clearance lamps

may be required that comply with this standard.

Width less than

2032 mm [80 in]

Width 2032 mm

[80 in] or more

Item

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ford SUPER DUTY F-SERIES 6C34-19A268-BA Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford SUPER DUTY F-SERIES 6C34-19A268-BA