Ford 2009 Explorer Sport Trac v.2 Manuel d'utilisateur télécharger pdf (Page 92)

100

101

4. Press and hold the reset button

on the compass module for

approximately four seconds until

COMPASS ZONE XX appears in the

message center display.

5. Continue to press the reset button until the correct zone appears in

the message center display.

6. After four seconds ZONE XX IS

SET will appear in the message

center display.

7. The display will return to normal

operation. The zone is now updated.

Compass calibration adjustment

Perform compass calibration in an open area free from steel structures

and high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

1. Start the vehicle.

2. Locate the reset button on the compass sensor mounted on the base

of mirror.

3. To calibrate, press and hold the

reset button on the compass module

for approximately eight seconds and

release.

4. Slowly drive the vehicle in a

circle (less than 3 mph [5 km/h])

until the CIRCLE SLOW TO CALIBRATE display changes to

CALIBRATION COMPLETED. It will take up to five circles to complete

calibration.

5. The compass is now calibrated.

2009 07+ Explorer Sport Trac (esp)

Owners Guide, 2nd Printing

USA (fus)

Driver Controls

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 350 351

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 Explorer Sport Trac v.2 Manuel d'utilisateur Page 92

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 Explorer Sport Trac v.2