Ford 2009 Explorer Sport Trac v.2 Manuel d'utilisateur télécharger pdf (Page 187)

4. Clip the tether strap to the

anchor and return the seat back to

its locked position.

If the tether strap is clipped

incorrectly, the child safety seat may

not be retained properly in the

event of a collision.

5. Tighten the child safety seat tether strap according to the

manufacturer’s instructions.

To unhook the tether strap, unfasten the safety belts securing the child

seat and put some slack into the tether strap. Tip the seat back forward

enough so that you can reach behind the seat and unhook the tether

hook.

If the safety seat is not anchored properly, the risk of a child being

injured in a collision greatly increases.

Child booster seats

The belt-positioning booster (booster seat) is used to improve the fit of

the vehicle safety belt. Children outgrow a typical child seat (e.g.,

convertible or toddler seat) when they weigh about 40 lb (18 kg) and are

around four (4) years of age. Consult your child safety seat owner guide

for the weight, height, and age limits specific to your child safety seat.

Keep your child in the child safety seat if it properly fits the child,

remains appropriate for their weight, height and age AND if properly

secured to the vehicle.

Although the lap/shoulder belt will provide some protection, children

who have outgrown a typical child seat are still too small for lap/shoulder

belts to fit properly, and wearing an improperly fitted vehicle safety belt

could increase the risk of serious injury in a crash. To improve the fit of

both the lap and shoulder belt on children who have outgrown child

safety seats, Ford Motor Company recommends use of a belt-positioning

booster.

2009 07+ Explorer Sport Trac (esp)

Owners Guide, 2nd Printing

USA (fus)

Seating and Safety Restraints

187

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 350 351

Pas de commentaire

Ford 2009 Explorer Sport Trac v.2 Manuel d'utilisateur Page 187