Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 87)

• Compass display

• Compass zone adjustment

• Compass calibration adjustment

Briefly press the SELECT/RESET control switch to scroll through the

SETUP MENU display sequence. If the SELECT/RESET control switch is

not pressed within four seconds, the message center returns to the Info

Menu.

AWD lock

Select this function from the SETUP MENU to display the AWD locked

function.

1. Press the SELECT/RESET control

for the current display mode.

2. Press and hold the

SELECT/RESET control within four

seconds to turn the AWD system to

the LOCKED mode.

3. Press the SELECT/RESET control switch for the next SETUP MENU

item or wait for more than four seconds to return to the INFO MENU.

Note: When the AWD system is in the LOCKED mode, the 4X4 indicator

will be illuminated.

System check

Press and hold the SELECT/RESET

control switch to select SYSTEM

CHECK when “SYSTEM CHECK

HOLD RESET” is displayed in the

message center. Selecting this

function from the SETUP MENU

causes the message center to cycle through each of the systems being

monitored. For each of the monitored systems, the message center will

indicate either an OK message or a warning message for two seconds.

Pressing the SELECT/RESET control switch cycles the message center

through each of the systems being monitored.

The sequence of the system check report and how it appears in the

message center is as follows:

1. OIL LIFE

2. CHARGING SYSTEM

3. WASHER FLUID

2009 07+ Explorer Sport Trac (esp)

Owners Guide, 1st Printing

USA (fus)

Driver Controls

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 355 356

Pas de commentaire

Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur Page 87