Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 132)

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock™ keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously programmed coded key into the ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least three seconds, but no

more than 10 seconds.

3. Turn the ignition to the 1 (off)

position and remove the first coded

key from the ignition.

4. Within ten seconds of turning the

ignition to the 1 (off) position,

insert the second previously coded key into the ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least three seconds, but no more

than 10 seconds.

6. Turn the ignition to the 1 (off) position and remove the second

previously programmed coded key from the ignition.

7. Within twenty seconds of turning the ignition to the 1 (off) position

and removing the previously programmed coded key, insert the new

unprogrammed key (new key/valet key) into the ignition.

2009 07+ Explorer Sport Trac (esp)

Owners Guide, 1st Printing

USA (fus)

Locks and Security

132

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 355 356

Pas de commentaire

Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur Page 132