Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 122)

Power door unlock/lock procedure

You must complete Steps 1-5 within 30 seconds or the procedure will

have to be repeated. If the procedure needs to be repeated, you must

wait 30 seconds. Note: All doors must be closed and remain closed

throughout the configuration process.

1. Turn the ignition to the on

position.

2. Press the power door unlock

control three times.

3. Turn the ignition from the on to

the off position.

4. Press the power door unlock

control three times.

5. Turn the ignition back to the on position. The horn will chirp.

6. Press the lock control, then press the unlock control. The horn will

chirp once if autounlock was deactivated or twice (one short and one

long chirp) if autounlock was activated.

7. Turn the ignition to the off position. The horn will chirp once to

confirm the procedure is complete.

Keyless entry keypad procedure

1. Turn the ignition to the off position.

2. Close all doors.

3. Enter 5-digit entry code

4. Press and hold the 3 • 4. While holding the 3 • 4pressthe7• 8

twice.

5. Release the 7 • 8.

6. Release the 3 • 4.

The user should receive a horn chirp to indicate the system has been

disabled or a chirp followed by a honk to indicate the system has been

enabled.

2009 07+ Explorer Sport Trac (esp)

Owners Guide, 1st Printing

USA (fus)

Locks and Security

122

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 355 356

Pas de commentaire

Ford 2009 Explorer Sport Trac v.1 Manuel d'utilisateur Page 122