Ford 2008 Focus v.3 Manuel d'utilisateur

Introduction 4Instrument Cluster 10Warning lights and chimes 10Gauges 15Entertainment Systems 17AM/FM stereo with CD/MP3 17Auxiliary input jack (Line

WARNING LIGHTS AND CHIMESStandard instrument clusterOptional instrument clusterWarning lights and gauges can alert you to a vehicle condition that may

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

• safety belt pretensioners• one or more impact and safing sensors.• Front passenger sensing system. Refer to Front passenger sensingsystem later in t

The front passenger sensing system will turn off the passenger seat sideairbag if:• the seat is empty and safety belt is unbuckled.The front passenger

• Restart the vehicle and have the person remain in this position forabout two minutes. This will allow the system to detect that personand enable the

The front passenger sensing system may detect small or medium objectsplaced on the seat cushion. For most objects that are in the frontpassenger seat,

WARNING: To reduce the risk of possible serious injury:Do not stow objects in seat back map pocket (if equipped) orhang objects off seat back if a chi

WARNING: Any alteration/modification to the front passengerseat may affect the performance of the front passenger sensingsystem.Determining if the sys

WARNING: Do not attempt to service, repair, or modify theairbag SRS, its fuses or the seat cover on a seat containing anairbag. See your authorized de

designed to inflate between the door panel and occupant to furtherenhance the protection provided occupants in side impact collisions.The airbag SRS i

WARNING: Do not place objects or mount equipment on ornear the side air curtain cover.WARNING: Do not lean your head on the door. The side airbagcould

Service engine soon: The Serviceengine soon indicator lightilluminates when the ignition is firstturned to the on position to checkthe bulb and to ind

How does the side air curtain system work?The design and development of theside air curtain system includedrecommended testing proceduresthat were dev

window area and occupant to further enhance the head protectionprovided to occupants in side impact collisions. The seat-mounted sideairbag was design

• The readiness light will not illuminate immediately after ignition isturned on.• A series of five beeps will be heard. The tone pattern will repeatp

Important child restraint precautionsYou are required by law to use safety restraints for children in the U.S.and Canada. If small children (generally

To improve the fit of both the lap and shoulder belt on children whohave outgrown child safety seats, Ford Motor Company recommends useof a belt-posit

• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo

WARNING: Move a child to a different seating location if theshoulder belt does not stay positioned on the shoulder duringuse.WARNING: Follow all instr

• Keep the buckle release button pointing up and away from the safetyseat, with the tongue between the child seat and the release button,to prevent ac

WARNING: Children 12 and under should be properlyrestrained in the rear seat whenever possible.1. Position the child safety seat in aseat with a combi

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

WARNING: Driving a vehicle with the brake system warninglight on is dangerous. A significant decrease in brakingperformance may occur. It will take yo

8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m

2. Slide the tongue up the webbing.3. While holding both shoulder andlap portions next to the tongue,route the tongue and webbingthrough the child sea

5. While pushing down with yourknee on the child seat pull up onthe shoulder belt portion to tightenthe lap belt portion of thecombination lap and sho

The tether strap anchors in yourvehicle are in the following positions(shown from top view, left is frontof the vehicle):WARNING: Attach the tether st

6. Install the child safety seat tightly using the LATCH anchors or safetybelts. Follow the instructions in this chapter.7. Tighten the child safety s

The LATCH anchors are located onthe rear section of the seat cushion,at the bottom of the seatback.Follow the child seat manufacturer’sinstructions to

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli

WARNING: The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydro

Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr

WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor ⬙blowout⬙, with unexpecte

WARNING: Never remove the coolant reservoir cap while theengine is running or hot.Anti-theft system: Flashes whenthe SecuriLock™ Passive Anti-theftSys

Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w

• Do not run over curbs or hit the tire against a curb when parkingWARNING: If your vehicle is stuck in snow, mud, sand, etc., donot rapidly spin the

• Front Wheel Drive (FWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can be corrected by rotating the tires.Note: If your tir

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

AdvanceTrac™/TractionControl™ system (if equipped):Illuminates when the TractionControl™ is turned off and will flashwhen active. If the light remains

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

vehicle placard or tire inflation pressure label. (If your vehicle has tiresof a different size than the size indicated on the vehicle placard or tire

Changing tires with TPMSEach road tire is equipped witha tire pressure sensor fastenedto the inside rim of the wheel.The pressure sensor is coveredby

When you believe your system is not operating properlyThe main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air.

Low Tire PressureWarning LightPossible cause Customer Action RequiredFlashing WarningLightSpare tire in use Your temporary spare tire is inuse. Repair

SNOW TIRES AND CHAINSWARNING: Snow tires must be the same size, load index, speedrating as those originally provided by Ford. Use of any tire orwheel

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loadweight is als

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o

The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

TRAILER TOWINGWARNING: Never tow a trailer with this vehicle. Your vehicle isnot equipped to tow. No towing packages are available throughan authorize

STARTINGPositions of the ignition1. OFF, locks the steering wheel,automatic transmission gearshiftlever and allows key removal. Thisposition also shut

WARNING: If you smell exhaust fumes inside your vehicle, haveyour dealer inspect your vehicle immediately. Do not drive if yousmell exhaust fumes.Impo

• Make sure the gearshift is in P(Park).If starting a vehicle with a manualtransmission:1. Make sure the parking brake isset.2. Push the clutch pedal

Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START).2. Turn the key to 4 (START), thenrelease the key as soon as theengin

WARNING: Failure to follow engine block heater instructionscould result in property damage or physical injury.WARNING: To reduce the risk of electrica

• Finally, have the engine block heater system checked during your falltune-up to be sure it’s in good working order.How to use the engine block heate

Using ABSWhen hard braking is required, apply continuous force on the brakepedal; do not pump the brake pedal since this will reduce theeffectiveness

WARNING: Always set the parking brake fully and make surethat the gearshift is securely latched in P (Park) (automatictransmission) or in 1 (First) (m

The Traction Control™ switch islocated on the instrument panel.The Traction Control™ system willautomatically turn on every time theignition is turned

Odometer: Registers the total miles(kilometers) of the vehicle.If equipped with a message center,refer to Message center in theDriver Controls chapter

• loose or worn steering components• improper steering alignmentA high crown in the road or high crosswinds may also make the steeringseem to wander/p

WARNING: Always set the parking brake fully and make surethe gearshift is latched in P (Park). Turn the ignition to the OFFposition and remove the key

To put your vehicle in gear:• Start the engine• Depress the brake pedal• Move the gearshift lever into the desired gearTo put your vehicle in P (Park)

D (Drive) without OverdriveOverdrive can be deactivated bypressing the transmission controlswitch on the side of the gearshiftlever.• This position al

If necessary, try turning the Traction Control™ system off. This willallow the wheels to spin, which may help to free your stuck vehicle. Formore info

Recommended shift speedsDo not downshift into 1 (First) when your vehicle is movingfaster than 15 mph (24 km/h). This will damage the clutch.Upshift a

DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive th

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

• towing of your disabled vehicle• emergency travel expense reimbursement• travel planning benefitsIn Canada, for uninterrupted Roadside Assistance co

FUEL PUMP SHUT-OFF SWITCHThis device stops the electric fuel pump from sending fuel to the enginewhen your vehicle has had a substantial jolt.After an

AUDIO SYSTEMSAM/FM/single CD or in-dash CD6/MP3 satellite compatible soundsystemWARNING: Driving while distracted can result in loss of vehiclecontrol

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 30A Not used (spare)2 15A Brake Switch CHM

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description15 10A Recirculated Air, Air Conditioning16 15A Not used (spare)17 20A Powe

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description44 10A Not used (spare)45 5A Front Wipers (logic)46 7.5A Front Passenger Se

The high-current fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription1 15A Heated mirror2 30A Rear defrost3 20

Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription27 — Spare28 15A PCM29 15A Ignition30A — Cooling fan low speed relay30B — Starter rel

Have a flat tire serviced by an authorized dealer in order to preventdamage to the TPMS sensor, refer to Tire Pressure Monitoring System(TPMS) in the

When driving with one of the dissimilar spare tires listed above, do not:• Exceed 50 mph (80 km/h)• Load the vehicle beyond maximum vehicle load ratin

When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to:• Towing a trailer• Driving vehicles equipped with a

WARNING: Do not attempt to change a tire on the side of thevehicle close to moving traffic. Pull far enough off the road toavoid the danger of being h

Note: Your vehicle is equipped witha unique audio system. If yourdisplay shows six small circles in thedisplay, your audio system is a CD6system. If n

4. Loosen each wheel lug nutone-half turn counterclockwise butdo not remove them until the wheelis raised off the ground.5. The vehicle jacking points

9. Remove the jack and fully tightenthe lug nuts in the order shown.Refer to Wheel lug nut torquespecifications later in this chapterfor the proper lu

1. Air compressor (inside)2. Diverter knob3. On/Off switch4. Air pressure gauge5. Sealant bottle/canister6. Sealant filling clear tube7. Sealant tube

General informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury or death.Do not att

• Never leave the temporary mobility kit unattended when it isoperating.• Sealant compound contains latex. Make sure that you use thenon-latex gloves

Do not remove any foreign object that has pierced the tire. If a punctureis located in the tire sidewall, stop and call roadside assistance.1. Remove

8. Inflate the tire to the pressurelisted on the tire label located onthe driver’s door or the door jamarea.Note: When the sealing compound is first a

Second stage: Checking tire pressureCheck the air pressure of your tires as follows:1. Remove the valve cap from the tire valve.2. Unhook the black ho

Note: After the sealing compound has been used, the maximum vehiclespeed is 50 mph (80 km/h) and the maximum driving distance is120 miles (200 km). Th

3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealantcanister.Installation

TREBLE: Press SOUND repeatedly to reach the treble setting.PressSEEK/TRACK to adjust the level of treble.BALANCE: Press SOUND repeatedly to reach the

2. Once aligned, seat the sealantcanister by lightly pushing downuntil you hear an audible click.3. Wrap the clear tube around thecompressor housing.N

WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque at 500 miles (800 km)after any wheel disturbance (tire rotation, cha

JUMP STARTINGWARNING: The gases around the battery can explode ifexposed to flames, sparks, or lit cigarettes. An explosion couldresult in injury or v

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

Emergency towingIn case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport veh

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

Seating and Safety Restraints 75Seating 75Safety restraints 82Airbags 97Child restraints 112Tires, Wheels and Loading 126Tire information 126Tire infl

6. MENU: Press repeatedly toaccess the following features:SATELLITE RADIO MENU (if equipped): Press MENU when satelliteradio mode is active to access.

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

WAXING• Wash the vehicle first.• Do not use waxes that contain abrasives; use Motorcraft PremiumLiquid Wax (ZC-53-A), which is available from your aut

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal.When washing:• Take care when u

• ENABLE ALERTS / DISABLE ALERTS: Press OK to enable/disablethe satellite alert status which alerts you when your selected songs areplaying on a satel

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

• Be certain to wash or wipe your hands clean if you have been incontact with certain products such as insect repellent and suntanlotion in order to a

WARNING: Do not use cleaning solvents, bleach or dye on thevehicle’s safety belts, as these actions may weaken the beltwebbing.WARNING: On vehicles eq

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

Working with the engine on• Automatic transmission:1. Set the parking brake and shift to P (Park).2. Block the wheels.• Manual transmission:1. Set the

3. Lift the hood and locate the proprod on the passenger side of thevehicle near the fender. Support thehood with the prop rod.IDENTIFYING COMPONENTS

7. Engine oil dipstick8. Power steering fluid reservoir9. Engine coolant reservoir10. Windshield washer fluid reservoirWINDSHIELD WASHER FLUIDAdd flui

CHANGING THE WIPER BLADES1. Pull the wiper blade and armaway from the glass. Turn the bladeat a right angle to the arm. Push thelock tab (A) to releas

• If the oil level is between theMIN and MAX marks, the oillevel is acceptable. DO NOTADD OIL.• If the oil level is below the MINmark, add enough engi

SHUFFLE: Press MENU until SHUFFLE ON/OFF appears in the display.UseSEEK/TRACK to toggle ON/OFF. If you wish to engageshuffle mode right away, press SE

Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oilOnly use oils “Certified For Gasoline Engines” by th

BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.If

WARNING: Keep batteries out of reach of children. Batteriescontain sulfuric acid. Avoid contact with skin, eyes or clothing.Shield your eyes when work

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

• Add Motorcraft Premium Gold Engine Coolant or equivalentmeeting Ford specification WSS-M97B51-A1. Refer toMaintenance product specifications and cap

Add the proper mixture of coolant and water to the cooling system byfollowing these steps:1. Before you begin, turn the engine off and let it cool.2.

Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Maintenance product specifications and capacities in

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperature gauge will move to the red (hot)area.• The(engine coolant

FUEL FILTERFor fuel filter replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchangin

12. SEEK/TRACK: In radio mode,pressSEEK/TRACK toaccess the previous/next strongradio station.In CD/MP3 mode, pressSEEK/TRACK to access theprevious/nex

Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Al

RefuelingWARNING: Fuel vapor burns violently and a fuel fire can causesevere injuries. To help avoid injuries to you and others:• Read and follow all

At the next opportunity, safely pull off of the road, remove the fuel fillercap, align the cap properly and reinstall it. The check fuel caplightor “c

prohibited by law and could damage your vehicle. Do not use fuelcontaining methanol. It can damage critical fuel system components.Your vehicle was no

Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the rightf

empty. Empty reserve is the small amount of fuel remaining in the fueltank after the fuel gauge indicates empty.The amount of usable fuel in the empty

economy under current driving conditions. Additionally, keeping recordsduring summer and winter will show how temperature impacts fueleconomy. In gene

Conditions• Heavily loading a vehicle or towing a trailer may reduce fuel economyat any speed.• Carrying unnecessary weight may reduce fuel economy (a

The scheduled maintenance items listed in scheduled maintenanceinformation are essential to the life and performance of your vehicleand to its emissio

a malfunction. Temporary malfunctions may cause the Service enginesoonindicator to illuminate. Examples are:1. The vehicle has run out of fuel—the eng

14. ON/OFF/VOL (Volume): Pressto turn ON/OFF. Turn toincrease/decrease volume.Note: If the volume is set above acertain level and the ignition isturne

for 15 seconds without cranking the engine. If the Service enginesoonindicator blinks eight times, it means that the vehicle is notready for I/M testi

BRAKE/CLUTCH FLUIDBrake and clutch systems are supplied from the same reservoir.The fluid level will drop slowly asthe brakes wear, and will rise when

6. Install the dipstick making sure it is fully seated in the filler tube.7. Remove the dipstick and inspect the fluid level. The fluid should be inth

If an overfill occurs, excess fluidshould be removed by an authorizeddealer.An overfill condition oftransmission fluid may causeshift and/or engagemen

Changing the air filter element (Non-PZEV only)1. Release the clamps that securethe air filter housing cover.2. Carefully separate the two halvesof th

2Only use the specified replacement oil filter. The use of a non-specifiedoil filter can result in engine damage.3The PCV valve is a critical emission

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord Part Name orEquivalentFord Part Number / FordSpecificationBrake fluid and (clutchfl

Item CapacityFord Part Name orEquivalentFord Part Number / FordSpecificationCooling system stopleak pellets—Motorcraft CoolingSystem Stop LeakPelletsV

ENGINE DATAEngine 2.0L I4 engineCubic inches 121Required fuel 87 octaneFiring order 1–3–4–2Ignition system C.O.PCompression ratio 10.0:1Spark plug gap

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

18. LOAD: For a single CDsystem, this control is notoperational. To load a CD, simplyinsert the disc label side up into the CD slot.For a CD6 system,

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

Peace of mindMobile-Ease™ hands free communication systemRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the foll

AAir cleaner filter ...243–244Air conditioningmanual heating and airconditioning system ...32Airbag supplemental restraintsy

Cleaning your vehicleengine compartment ...209instrument panel ...210interior ...211plas

Event data recording ...6Exhaust fumes ...154FFail safe cooling ...227Fan, Engine Cooling

LLampsbulb replacementspecifications chart ...39daytime running light ...36fog lamps ...35h

Safety belts(see Safety restraints) ...82, 85–90Safety Canopy ...106Safety defects, reporting ..205–206Safety restraints ...

fluid, checking and adding(automatic) ...241fluid, checking and adding(manual) ...243fluid, re

Required equipment:1. Any portable music player designed to be used with headphones2. An audio extension cable with stereo male 1/8 in. (3.5 mm)connec

5. For safety reasons, connecting or adjusting the settings on yourportable music player should not be attempted while the vehicle ismoving. Also, the

• Station overload: When you pass a broadcast tower, a stronger signalmay overtake a weaker one and play while the weak station frequencyis displayed.

unobstructed, open view of the sky, a requirement of a satellite radiosystem. Like AM/FM, there are several factors that can affect satelliteradio rec

Maintenance and Specifications 214Engine compartment 216Engine oil 218Battery 221Engine coolant 223Fuel information 229Air filter(s) 243Part numbers 2

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title informationnot available at thistime on this channel.The

MANUAL HEATING AND AIR CONDITIONING SYSTEM1.Fan speed adjustment: Controls the volume of air circulated inthe vehicle.2.RRear defroster: Press to acti

9. Temperature control: Controls the temperature of the airflow in thevehicle.10.Passenger heated seat control (if equipped): Press toactivate/deactiv

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C in theMAX A/C po

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the low beam headlampso

Flash to passPull toward you slightly to activateand release to deactivate.Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a redu

AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident, the alignment of y

5. Locate the vertical adjuster oneach headlamp, then usea7mmAllen wrench or a Phillipsscrewdriver to adjust the headlampup or down.6. HORIZONTAL AIM

Ambient lighting (if equipped)Illuminates four footwells and threecupholders with a choice of sevencolors. The ambient lighting controlswitch is locat

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Function Trade numberHeadlamps H13Park and turn lamp (front) 3457 NAKSide marker lamp (front) 168Fog lamps (if equipped) H11 LLStop/turn and tail lamp

6. Remove bulb from the headlampassembly by turning itcounterclockwise, then pull itstraight out.Install the new bulb in reverseorder.WARNING: Handle

Replacing side marker bulbs1. Make sure the headlamp controlis in the off position and open thehood.2. Remove two push pins from theradiator grille on

Replacing fog lamp bulbs (if equipped)1. Make sure the headlamp switch isin the off position.2. Reach under the front fender, andremove the harness/bu

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

TILT STEERING WHEELTo adjust the steering wheel:1. Pull the lever down to unlock thesteering column.2. While the lever is in the downposition, move th

To prevent the fuse from being blown, do not use the power point(s)over the vehicle capacity of 12 VDC/180W. If the power point or cigarlighter socket

Press and pull the window switchesto open and close windows.• Push down (to the first detent)and hold the switch to open.• Pull up (to the first deten

Automatic dimming interior rear view mirror (if equipped)With microphoneYour vehicle may be equipped withan interior rear view mirror whichhas an auto

Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

3. Press the SET + control andrelease it.4. Take your foot off the acceleratorpedal.5. The indicator lighton theinstrument cluster will turn on.Note:•

Increasing speed while using speed controlThere are three ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspee

Turning off speed controlThere are two ways to turn off thespeed control:• Press the speed control OFFcontrol.• Turn off the ignition.Note: When you t

In any mode:• Press VOL + or VOL - to adjustthe volume.SYNC hands free control feature(if equipped)Pressbriefly to use the voicecommand feature. You w

To open the moon roof:The moon roof is equipped with anautomatic, one-touch, expressopening and closing feature. To stopmotion at any time during theo

MESSAGE CENTER (IF EQUIPPED)With the ignition in the on position,the message center, located on yourinstrument cluster, displaysimportant vehicle info

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon orliters/100 km.If you calculate

• Autolock (if equipped)• Autounlock (if equipped)• LanguageReset to English (if in another language)When entering the SETUP MENUand a non-English lan

1. To disable/enable the autolockfeature, select this function from theSETUP control for the currentdisplay mode.2. Press the RESET control to turnthe

Warning messages that have been reset are divided into two categories:• They will reappear on the display 10 minutes from the reset.• They will not re

Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.WARNING: Please read the section Airbag Supple

BRAKE FLUID LEVEL LOW — Indicates the brake fluid level is lowand the brake system should be inspected immediately. Refer toBrake/clutch fluid in the

KEYSThe key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency.If

The autolock feature repeats when:• any door is opened then closed while the ignition is in the on positionand the vehicle speed is 9 mph (15 km/h) or

Power door unlock/lock procedureBefore starting, ensure the ignition is in the off position and all vehicledoors are closed. You must complete Steps 1

Deactivating/activating autounlock featureYour vehicle comes with the autounlock features activated; there arethree methods to enable/disable this fea

CHILDPROOF DOOR LOCKS• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the outside when the

To open the luggage compartmentdoor (lid) from within the luggagecompartment, pull the illuminated“T” shaped handle and push up onthe trunk lid. The h

REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the fo

2. With the all-door remote entry, press and release again withinthree seconds to unlock all the doors.The remote entry system activates the illuminat

Sounding a panic alarmPressto activate the alarm. Press the control again, or turn theignition to the on position to deactivate.Note: The panic alarm

To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access e

5. Snap the two halves back together.Note: Replacement of the battery will not cause the remote transmitterto become deprogrammed from your vehicle. T

9. Turn the ignition to the 1 (off) position after you have finishedprogramming all of the remote entry transmitters.10. The doors will lock, then unl

If a problem occurs with the SecuriLock™ system, the indicator will flashrapidly or glow steadily when the ignition is in the on position. If thisoccu

6. Turn the ignition from the 1 (off) position to the 3 (on) position. Keepthe ignition in the 3 (on) position for at least one second but not moretha

Disarming the systemYou can disarm the system by any of the following actions:• Unlock the doors by pressing thecontrol on your remote entrytransmitte

SEATINGWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the event o

To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint bypulling up o

To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Press and ho

WARNING: To minimize the risk of neck injury in the event of acrash, head restraints must be installed properly.Adjusting the front manual seatWARNING

Pull up on the control (if equipped)to raise the seat and push down onthe control to lower the seat.Lift the control to adjust the angleof the seatbac

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Heated seats (if equipped)WARNING: Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes, spinal cordinjur

Tip/slide front passenger seat (if equipped)Lift the control and fold theseatback forward.The seat can be slid forward toallow easier entry to the rea

SAFETY RESTRAINTSPersonal Safety System™The Personal Safety System™ provides an improved overall level offrontal crash protection to front seat occupa

Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ

The front passenger sensing system can automatically turn off thepassenger front airbag. The system is designed to help protect small(child size) occu

The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety

WARNING: In a rollover crash, an unbelted person issignificantly more likely to die than a person wearing a seat belt.WARNING: Each seating position i

2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.Energy management feature• This vehicle has a safety belt system with an e

How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt

Safety belts with locking cinch tongue (rear center position only)The locking cinch tongue will slide up and down the belt webbing whenthe belt is in

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

WARNING: Each seating position in your vehicle has a specificsafety belt assembly which is made up of one buckle and onetongue that are designed to be

Safety belt extension assemblyIf the safety belt is too short when fully extended, there is an 8 inch(20 cm) safety belt extension assembly that can b

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than1-2 minutes h

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

The driver and front passenger Belt-Minder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The supplemental restraint system is designed to work with the safetybelt to help protect the driver and rig

WARNING: When possible, all children 12 years old and undershould be properly restrained in a rear seating position.WARNING: The National Highway Traf

Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear