Introduction 4Instrument Cluster 10Warning lights and chimes 10Gauges 15Entertainment Systems 17Auxiliary input jack (Line in) 25USB port 27Satellite
WARNING LIGHTS AND CHIMESStandard instrument clusterOptional instrument clusterWarning lights and gauges can alert you to a vehicle condition that may
• safety belt pretensioners• one or more impact and safing sensors.• Front passenger sensing system. Refer to Front passenger sensingsystem later in t
The front passenger sensing system will turn off the passenger seat sideairbag if:• the seat is empty and safety belt is unbuckled.The front passenger
• Restart the vehicle and have the person remain in this position forabout two minutes. This will allow the system to detect that personand enable the
ObjectsPass Airbag OffIndicator LampPassenger AirbagSmall (i.e. three-ringbinder, small purse,bottled water)Unlit DisabledMedium (i.e. heavybriefcase,
In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit.If the airbag readi
A difficulty with the system is indicated by one or more of the following:• The readiness light (same lightfor front and side airbag system)will eithe
How does the side airbag system work?The design and development of theside airbag system includedrecommended testing proceduresthat were developed by
The fact that the airbags did not inflate in a collision does not mean thatsomething is wrong with the system. Rather, it means the forces werenot of
WARNING: Do not lean your head on the door. The side airbagcould injure you as it deploys from the seat.WARNING: Do not attempt to service, repair, or
• The headliner will flex to open above the side doors to allow aircurtain deployment.• The same warning light, electronic control and diagnostic unit
Service engine soon: The Serviceengine soon indicator lightilluminates when the ignition is firstturned to the ON position to checkthe bulb and to ind
WARNING: If the side aircurtain has deployed, theair curtain will not functionagain. The side air curtainsystem (including the A, B andC pillar trim a
SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag suppleme
Children and safety beltsIf the child is the proper size, restrain the child in a safety seat. Childrenwho are too large for child safety seats (as sp
Booster seats should be used until you can answer YES to ALL of thesequestions:• Can the child sit all the way backagainst the vehicle seat back withk
Children and booster seats vary widely in size and shape. Choose abooster that keeps the lap belt low and snug across the hips, never upacross the sto
SAFETY SEATS FOR CHILDRENChild and infant or child safety seatsUse a safety seat that is recommended for the size and weight of thechild. Carefully fo
WARNING: Carefully follow all of the manufacturer’sinstructions included with the safety seat you put in yourvehicle. If you do not install and use th
2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro
5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a
Check to make sure the child seat is properly secured before each use.Installing child safety seats in cinch tongue combination lap andshoulder belt s
WARNING: Driving a vehicle with the brake system warninglight on is dangerous. A significant decrease in brakingperformance may occur. It will take yo
3. While holding both shoulder andlap portions next to the tongue,route the tongue and webbingthrough the child seat according tothe child seat manufa
7. Before placing the child into thechild seat, forcibly pull the childseat forward and back to make surethat the seat is held securely inplace. To ch
For vehicles with adjustable head restraints, route the tether strap underthe head restraint and between the head restraint posts, otherwise routethe
Attaching child safety seats with Lower Anchor and Tethers forChildren (LATCH) attachments for child seat anchorsSome child safety seats have two rigi
The LATCH anchors are located onthe rear section of the seat cushion,at the bottom of the seatback.Follow the child seat manufacturer’sinstructions to
INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli
WARNING: The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydro
• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the
WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor ⬙blowout⬙, with unexpecte
Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo
WARNING: Never remove the coolant reservoir cap while theengine is running or hot.Anti-theft system: Flashes whenthe SecuriLock™ Passive Anti-theftSys
Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them
U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s
WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w
Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t
The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire rotationRotating your tire
INFORMATION CONTAINED ON THE TIRE SIDEWALLBoth U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the
7. H: Indicates the tire’s speed rating. The speed rating denotes thespeed at which a tire is designed to be driven for extended periods oftime under
10. Tire Ply Composition and Material Used: Indicates the number ofplies or the number of layers of rubber-coated fabric in the tire tread andsidewall
Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
AdvanceTrac™/TractionControl™ system (if equipped):Illuminates when the TractionControl™ is turned OFF and willflash when active. If the lightremains
TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pre
The Tire Pressure Monitoring System complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing tw
Understanding your Tire Pressure Monitoring System (TPMS)The Tire Pressure Monitoring System measures pressure in your fourroad tires and sends the ti
Low Tire PressureWarning LightPossible cause Customer Action RequiredSolid Warning Light Tire(s)under-inflated1. Check your tire pressure toensure tir
Low Tire PressureWarning LightPossible cause Customer Action RequiredFlashing WarningLightSpare tire in use Your temporary spare tire is inuse. Repair
SNOW TIRES AND CHAINSWARNING: Snow tires must be the same size, load index, speedrating as those originally provided by Ford. Use of any tire orwheel
Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loadweight is als
GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).
Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o
The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w
GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera
TRAILER TOWINGWARNING: Never tow a trailer with this vehicle. Your vehicle isnot equipped to tow. No towing packages are available throughan authorize
STARTINGPositions of the ignition1. OFF, locks the steering wheel,automatic transaxle gearshift leverand allows key removal. Thisposition also shuts t
WARNING: If you smell exhaust fumes inside your vehicle, haveyour dealer inspect your vehicle immediately. Do not drive if yousmell exhaust fumes.Impo
• Make sure the gearshift is in P(Park).If starting a vehicle with a manualtransaxle:1. Make sure the parking brake isset.2. Push the clutch pedal to
Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START).2. Turn the key to 4 (START), thenrelease the key as soon as theengin
WARNING: Failure to follow engine block heater instructionscould result in property damage or physical injury.WARNING: To reduce the risk of electrica
• Finally, have the engine block heater system checked during your falltune-up to be sure it’s in good working order.How to use the engine block heate
Using ABSWhen hard braking is required, apply continuous force on the brakepedal; do not pump the brake pedal since this will reduce theeffectiveness
WARNING: Always set the parking brake fully and make surethat the gearshift is securely latched in P (Park) (automatictransmission) or in 1 (First) (m
The Traction Control™ switch islocated on the instrument panel.The Traction Control™ system willautomatically turn on every time theignition is turned
Odometer: Registers the total miles(kilometers) of the vehicle.If equipped with a message center,refer to Message center in theDriver Controls chapter
• loose or worn steering components• improper steering alignmentA high crown in the road or high crosswinds may also make the steeringseem to wander/p
WARNING: Always set the parking brake fully and make surethe gearshift is latched in P (Park). Turn the ignition to the OFFposition and remove the key
To put your vehicle in gear:• Start the engine• Depress the brake pedal• Move the gearshift lever into the desired gearTo put your vehicle in P (Park)
D (Drive) without OverdriveOverdrive can be deactivated bypressing the transmission controlswitch on the side of the gearshiftlever.• This position al
If necessary, try turning the Traction Control™ system off. This willallow the wheels to spin, which may help to free your stuck vehicle. Formore info
Recommended shift speedsDo not downshift into 1 (First) when your vehicle is movingfaster than 15 mph (24 km/h). This will damage the clutch.Upshift a
DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive th
ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside
Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•
HAZARD FLASHER CONTROLThe hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ign
AUDIO SYSTEMSAM/FM/single CD or in-dash CD6/MP3 satellite compatible soundsystemWARNING: Driving while distracted can result in loss of vehiclecontrol
FUSES AND RELAYSFusesIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinth
To remove a fuse, use the fuse puller tool provided on the powerdistribution box cover located in the engine compartment.The fuses are coded as follow
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description13 5A SYNC14 10A Not used (spare)15 10A Recirculated Air, Air Conditioning1
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description42 10A Not used (spare)43 10A Not used (spare)44 10A Not used (spare)45 5A
The high-current fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription1 15A Heated mirror2 30A Rear defrost3 20
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription27 — Spare28 15A PCM29 15A Ignition30A — Cooling fan low speed relay30B — Starter rel
Have a flat tire serviced by an authorized dealer in order to preventdamage to the TPMS sensor, refer to Tire Pressure Monitoring System(TPMS) in the
• Tow a trailer• Use snow chains on the end of the vehicle with the dissimilar sparetire• Use more than one dissimilar spare tire at a time• Use comme
• Driving vehicles with a load on the cargo rackDrive cautiously when using a full-size dissimilar spare tire/wheel andseek service as soon as possibl
1. Remove the spare tire and jack byturning their tie-down boltscounterclockwise. The lug wrench islocated in a bag next to, or on topof, the spare ti
Note: Your vehicle is equipped witha unique audio system. If yourdisplay shows six small circles in thedisplay, your audio system is a CD6system. If n
5. The vehicle jacking points aredepicted on the yellow warning labelon the jack shown here (2-doormodel shown, 4-door model similar).Depending on whi
TEMPORARY MOBILITY KIT (IF EQUIPPED)Your vehicle may be equipped with a temporary mobility kit (located inthe spare tire well in the trunk). The tempo
1. Air compressor (inside)2. Diverter knob3. On/Off switch4. Air pressure gauge5. Sealant bottle/canister6. Sealant filling clear tube7. Sealant tube
General informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury or death.Do not att
• Never leave the temporary mobility kit unattended when it isoperating.• Sealant compound contains latex. Make sure that you use thenon-latex gloves
Do not remove any foreign object that has pierced the tire. If a punctureis located in the tire sidewall, stop and call roadside assistance.1. Remove
8. Inflate the tire to the pressurelisted on the tire label located onthe driver’s door or the door jamarea.Note: When the sealing compound is first a
Second stage: Checking tire pressureCheck the air pressure of your tires as follows:1. Remove the valve cap from the tire valve.2. Unhook the black ho
Note: After the sealing compound has been used, the maximum vehiclespeed is 50 mph (80 km/h) and the maximum driving distance is 120miles (200 km). Th
3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealantcanister.Installation
TREBLE: Press SOUND repeatedly to reach the treble setting.PressSEEK/TRACK to adjust the level of treble.BALANCE: Press SOUND repeatedly to reach the
2. Once aligned, seat the sealantcanister by lightly pushing downuntil you hear an audible click.3. Wrap the clear tube around thecompressor housing.N
WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque at 500 miles (800 km)after any wheel disturbance (tire rotation, cha
JUMP STARTINGWARNING: The gases around the battery can explode ifexposed to flames, sparks, or lit cigarettes. An explosion couldresult in injury or v
Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,
3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex
Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
Emergency towingIn case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport veh
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling
Seating and Safety Restraints 74Seating 74Safety restraints 81Airbags 96Child restraints 111Tires, Wheels and Loading 125Tire information 125Tire infl
6. MENU: Press repeatedly toaccess the following features:SATELLITE RADIO MENU (if equipped): Press MENU when satelliteradio mode is active to access.
In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo
In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh
UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee
If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio
ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is
WAXING• Wash the vehicle first.• Do not use waxes that contain abrasives; use Motorcraft PremiumLiquid Wax (ZC-53-A), which is available from your aut
ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal.When washing:• Take care when u
• ENABLE ALERTS / DISABLE ALERTS: Press OK to enable/disablethe satellite alert status which alerts you when your selected songs areplaying on a satel
WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub
• Be certain to wash or wipe your hands clean if you have been incontact with certain products such as insect repellent and suntanlotion in order to a
WARNING: Do not use cleaning solvents, bleach or dye on thevehicle’s safety belts, as these actions may weaken the beltwebbing.WARNING: On vehicles eq
FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and
SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your
Working with the engine on• Automatic transmission:1. Set the parking brake and shift to P (Park).2. Block the wheels.• Manual transmission:1. Set the
2. Go to the front of the vehicle andlocate the auxiliary latch centeredunder the front of the hood andthen release it by pushing theauxiliary latch t
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT1. Engine oil filler cap2. Brake/Clutch fluid reservoir3. Power Distribution box4. Battery5. Air Filte
WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer
Poor wiper quality can be improved by cleaning the wiper blades and thewindshield, refer to Windows and wiper blades in the Cleaningchapter.To prolong
SHUFFLE: Press MENU until SHUFFLE ON/OFF appears in the display.UseSEEK/TRACK to toggle ON/OFF. If you wish to engageshuffle mode right away, press SE
2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap
Ford production and aftermarket (Motorcraft) oil filters are designed foradded engine protection and long life. If a replacement oil filter is usedtha
WARNING: When lifting a plastic-cased battery, excessivepressure on the end walls could cause acid to flow through thevent caps, resulting in personal
If the battery has been disconnected or a new battery has been installed,the clock and the preset radio stations must be reset once the battery isreco
When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO
• Add Motorcraft Premium Gold Engine Coolant or equivalentmeeting Ford specification WSS-M97B51-A1. Refer toMaintenance product specifications and cap
Add the proper mixture of coolant and water to the cooling system byfollowing these steps:1. Before you begin, turn the engine off and let it cool.2.
Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Maintenance product specifications and capacities in
How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperature gauge will move to the red (hot)area.• The “Engine Temper
FUEL FILTERFor fuel filter replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchangin
11. AM/FM: Press repeatedly toselect AM/FM1/FM2 frequency band.12. SEEK/TRACK: In radio mode,pressSEEK/TRACK toaccess the previous/next strongradio st
Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Al
RefuelingWARNING: Fuel vapor burns violently and a fuel fire can causesevere injuries. To help avoid injuries to you and others:• Read and follow all
At the next opportunity, safely pull off of the road, remove the fuel fillercap, align the cap properly and reinstall it. The check fuel caplightor “c
Your vehicle was not designed to use fuel or fuel additives with metalliccompounds, including manganese-based additives. Studies indicate thatthese ad
Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the rightf
The advertised capacity is the amount of the indicated capacity and theempty reserve combined. Indicated capacity is the difference in theamount of fu
Keep a record for at least one month and record the type of driving (cityor highway). This will provide an accurate estimate of the vehicle’s fuelecon
• Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in scheduled mainten
• Have the items listed in scheduled maintenance informationperformed according to the specified schedule.The scheduled maintenance items listed in sc
On board diagnostics (OBD-II)Your vehicle is equipped with a computer that monitors the engine’semission control system. This system is commonly known
Refer to Satellite radio menu under MENU for further information onselecting a satellite radio category.14. ON/OFF/VOL (Volume): Pressto turn ON/OFF.
If the Service engine soon indicator is on or the bulb does notwork, the vehicle may need to be serviced. Refer to the On boarddiagnostics (OBD-II) de
BRAKE/CLUTCH FLUIDBrake and clutch systems are supplied from the same reservoir.The fluid level will drop slowly asthe brakes wear, and will rise when
6. Install the dipstick making sure it is fully seated in the filler tube.7. Remove the dipstick and inspect the fluid level. The fluid should be inth
If an overfill occurs, excess fluidshould be removed by an authorizeddealer.An overfill condition oftransmission fluid may causeshift and/or engagemen
Changing the air filter element (Non PZEV only)1. Release the clamps that securethe air filter housing cover.2. Carefully separate the two halvesof th
2Only use the specified replacement oil filter. The use of a non-specifiedoil filter can result in engine damage.3The PCV valve is a critical emission
MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord Part Name orEquivalentFord Part Number /Ford SpecificationBrake fluid and (clutchfl
Item CapacityFord Part Name orEquivalentFord Part Number /Ford SpecificationCooling system stopleak pellets—Motorcraft CoolingSystem Stop Leak Pellets
ENGINE DATAEngine 2.0L I4 engineCubic inches 121Required fuel 87 octaneFiring order 1–3–4–2Ignition system C.O.PCompression ratio 10.0 :1Spark plug ga
IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli
In satellite radio mode (if equipped), press DIRECT then enter thedesired channel (i.e. 002) using the memory presets. If you only enterone digit, pre
The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of
Peace of mindMobile-Ease™ hands free communication systemRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the foll
AAir cleaner filter ...243–244Air conditioningmanual heating and airconditioning system ...32Airbag supplemental restraintsy
Cleaning your vehicleengine compartment ...209instrument panel ...210interior ...211plas
Event data recording ...6Exhaust fumes ...154FFail safe cooling ...227Fan, Engine Cooling
LLampsbulb replacementspecifications chart ...39daytime running light ...36fog lamps ...35h
Safety belts (see Safetyrestraints) ...81, 84–89Safety Canopy ...105Safety defects, reporting ..205–206Sa
fluid, checking and adding(automatic) ...241fluid, checking and adding(manual) ...243fluid, re
259
Your vehicle is equipped with anAuxiliary Input Jack (AIJ). TheAuxiliary Input Jack provides a wayto connect your portable musicplayer to the in-vehic
260
261
262
263
264
2. Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio in your audiosystem as this w
GENERAL AUDIO INFORMATIONRadio frequencies:AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio
Audio system warranty and serviceRefer to the Warranty Guide for audio system warranty information. Ifservice is necessary, see your dealer or qualifi
Maintenance and Specifications 214Engine compartment 217Engine oil 219Battery 221Engine coolant 223Fuel information 229Air filter(s) 243Part numbers 2
Note: SIRIUS reserves the unrestricted right to change, rearrange, addor delete programming including canceling, moving or adding particularchannels,
Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title information notavailable at this time on thischannel. Th
MANUAL HEATING AND AIR CONDITIONING SYSTEM1.Fan speed adjustment: Controls the volume of air circulated inthe vehicle.2.RRear defroster: Press to acti
9. Temperature control: Controls the temperature of the airflow in thevehicle.10.Passenger heated seat control (if equipped): Press toactivate/deactiv
For maximum cooling performance in MAX A/C mode:1. Select MAX A/C.2. Select the coolest temperature setting.3. Set the fan to the highest speed initia
HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Fog la
Flash to passPull toward you slightly to activateand release to deactivate.Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a redu
AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident, the alignment of y
5. Locate the vertical adjuster oneach headlamp, then usea7mmAllen wrench or a Phillipsscrewdriver to adjust the headlampup or down.6. HORIZONTAL AIM
Ambient lighting (if equipped)Illuminates four footwells and threecupholders with a choice of sevencolors. The ambient lighting controlswitch is locat
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
Function Trade numberHeadlamps H13Park and turn lamp (front) 3457 NAKSide marker lamp (front) 168Fog lamps (if equipped) H11 LLStop/turn and tail lamp
6. Remove bulb from the headlampassembly by turning itcounterclockwise, then pull itstraight out.Install the new bulb in reverseorder.WARNING: Handle
Replacing side marker bulbs1. Make sure the headlamp controlis in the off position and open thehood.2. Remove two push pins from theradiator grille on
Replacing fog lamp bulbs (if equipped)1. Make sure the headlamp switch isin the off position.2. Reach under the front fender, andremove the harness/bu
MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the
TILT STEERING WHEELTo adjust the steering wheel:1. Pull the lever down to unlock thesteering column.2. While the lever is in the downposition, move th
To prevent the fuse from being blown, do not use the power point(s)over the vehicle capacity of 12 VDC/180W. If the power point or cigarlighter socket
Press and pull the window switchesto open and close windows.• Push down (to the first detent)and hold the switch to open.• Pull up (to the first deten
Automatic dimming interior rear view mirror (if equipped)With Voice activated SYNCsystemYour vehicle may be equipped withan interior rear view mirror
Heated mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not remove ice
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ
Note:• Vehicle speed may vary momentarily when driving up and down asteep hill.• If the vehicle speed increases above the set speed on a downhill, you
Increasing speed while using speed controlThere are three ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspee
Turning off speed controlThere are two ways to turn off thespeed control:• Press the speed control OFFcontrol.• Turn OFF the ignition.Note: When you t
In AM, FM1, or FM2 mode:• Pressto access thenext/previous preset station.In Satellite radio mode (ifequipped):• Pressto advancethrough preset channels
MOON ROOF (SUNROOF) (IF EQUIPPED)You can move the glass panel of the moon roof back to open or tilt up toventilate the vehicle.WARNING: Before operati
• Tilt the moon roof into the vent position as far as possible. Release theswitch.• Press and hold the same switch again for 30 seconds until you see
Odometer/Trip odometerRefer to Gauges in the Instrument Cluster chapter.Distance to empty (DTE)Selecting this function from theINFO menu will give you
Instantaneous fuel economySelect this function from the INFOmenu to display your instantaneousfuel economy. This will display yourfuel economy as a Ba
The sequence of the system check report is as follows:1. Charging system2. Doors3. Trunk4. Brake system5. DTE/Fuel levelUnits (English/Metric)1. Selec
Language1. Select this function from theSETUP menu for the currentlanguage to be displayed.2. Waiting 4 seconds or pressing theRESET control cycles th
Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.WARNING: Please read the section Airbag supple
This acts as a reminder that these warning conditions still exist withinthe vehicle.Warnings StatusDriver door ajar Warning cannot be resetPassenger d
LOW TIRE PRESSURE. Displayed when one or more tires on yourvehicle have low tire pressure. Refer to Inflating your tires in the Tires,Wheels and Loadi
KEYSThe key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency.If
The autolock feature repeats when:• any door is opened then closed while the ignition is in the 3 (ON)position and the vehicle speed is 9 mph (15 km/h
7. Turn the ignition to the 1 (OFF) position. The horn will chirp once toconfirm the procedure is complete.Autounlock feature (if equipped)The autounl
4. Press the power door unlock control on the door panel three times.5. Turn the ignition back to the 3 (ON) position. The horn will chirp onetime to
To open the luggage compartmentdoor (lid) from within the luggagecompartment, pull the illuminated“T” shaped handle and push up onthe trunk lid. The h
REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the fo
2. With the all-door remote entry, press and release again withinthree seconds to unlock all the doors.The remote entry system activates the illuminat
Sounding a panic alarmPressto activate the alarm. Press the control again, or turn theignition to the 3 (ON) position to deactivate.Note: The panic al
To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access e
Note: Replacement of the battery will not cause the remote transmitterto become deprogrammed from your vehicle. The remote transmittershould operate n
SECURILOCK™ PASSIVE ANTI-THEFT SYSTEMSecuriLock™ passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent
Replacing coded keys can be very costly. Store an extra programmed keyaway from the vehicle in a safe place to help prevent anyinconveniences. Please
11. Your new, unprogrammed key is now programmed.If the key has been successfully programmed it will start the vehicle’sengine and the theft indicator
SEATINGWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the event o
To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint bypulling up o
To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Press and ho
WARNING: To minimize the risk of neck injury in the event of acrash, head restraints must be installed properly.Adjusting the front manual seatWARNING
Pull up on the control (if equipped)to raise the seat and push down onthe control to lower the seat.Lift the control to adjust the angleof the seatbac
Heated seats (if equipped)WARNING: Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes, spinal cordinjur
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag
Tip/slide front seat (if equipped)Lift the control and fold theseatback forward.The seat can be slid forward toallow easier entry to the rear seats.Sl
SAFETY RESTRAINTSPersonal Safety System™The Personal Safety System™ provides an improved overall level offrontal crash protection to front seat occupa
Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ
The front passenger sensing system can automatically turn off thepassenger front airbag. The system is designed to help protect small(child size) occu
The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety
WARNING: In a rollover crash, an unbelted person issignificantly more likely to die than a person wearing a seat belt.WARNING: Each seating position i
Energy management feature• This vehicle has a safety belt system with an energy managementfeature at the front outboard seating positions to help furt
How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt
Safety belts with locking cinch tongue (rear center position only)The locking cinch tongue will slide up and down the belt webbing whenthe belt is in
WARNING: Each seating position in your vehicle has a specificsafety belt assembly which is made up of one buckle and onetongue that are designed to be
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi
Safety belt extension assemblyIf the safety belt is too short when fully extended, there is an 8 in (20cm) safety belt extension assembly that can be
Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war
If... Then...The driver’s and front passenger’ssafety belts are buckled before theignition switch is turned to the ONposition or less than 1-2 minutes
The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra
Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate
The driver and front passenger Belt-Minder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The supplemental restraint system is designed to work with the safetybelt to help protect the driver and rig
WARNING: Always transport children 12 years old and under inthe back seat and always properly use appropriate childrestraints.WARNING: The National Hi
Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear
The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt
Commentaires sur ces manuels