Ford 2008 Focus v.1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Voitures Ford 2008 Focus v.1. FORD 2008 Focus v.1 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 256
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Introduction 4
Instrument Cluster 10
Warning lights and chimes 10
Gauges 15
Entertainment Systems 17
Auxiliary input jack (Line in) 25
USB port 27
Satellite radio information 29
Climate Controls 32
Manual heating and air conditioning 32
Rear window defroster 34
Lights 35
Headlamps 35
Turn signal control 38
Bulb replacement 39
Driver Controls 44
Windshield wiper/washer control 44
Steering wheel adjustment 45
Power windows 46
Mirrors 47
Speed control 49
Moon roof 53
Message center 55
Locks and Security 62
Keys 62
Locks 62
Anti-theft system 71
Table of Contents
1
2008 Focus (foc)
Owners Guide (post-2002-fmt)
USA (fus)
Vue de la page 0
1 2 3 4 5 6 ... 255 256

Résumé du contenu

Page 1 - Table of Contents

Introduction 4Instrument Cluster 10Warning lights and chimes 10Gauges 15Entertainment Systems 17Auxiliary input jack (Line in) 25USB port 27Satellite

Page 2

WARNING LIGHTS AND CHIMESStandard instrument clusterOptional instrument clusterWarning lights and gauges can alert you to a vehicle condition that may

Page 3

Several air bag system components get hot after inflation. Do nottouch them after inflation.If the air bag has deployed, the air bag will not function

Page 4 - Introduction

The front passenger sensing system will disable (will not inflate) thefront passenger’s frontal airbag if:• the front passenger seat is unoccupied, or

Page 5

The front passenger sensing system is designed to enable (may inflate)the front passenger’s frontal airbag anytime the system senses that aperson of a

Page 6

Sitting improperly out of position or with the seat back reclinedtoo far can take off weight from the seat cushion and affect thedecision of the front

Page 7

To reduce the risk of possible serious injury:Do not stow objects in seat back map pocket (if equipped) orhang objects off seat back if a child is in

Page 8

Any alteration/modification to the front passenger seat mayaffect the performance of the front passenger sensing system.Determining if the system is o

Page 9

Do not attempt to service, repair, or modify the airbag SRS, itsfuses or the seat cover on a seat containing an airbag. See yourauthorized dealer.All

Page 10 - Instrument Cluster

seat is empty, and the safety belt is not properly buckled, the frontpassenger seat side airbag will be turned off by the front passengersensing syste

Page 11

Do not place objects or mount equipment on or near theheadliner at the siderail that may come into contact with adeploying side air curtain. Failure t

Page 12

How does the side air curtain system work?The design and development of theside air curtain system includedrecommended testing proceduresthat were dev

Page 13

Service engine soon: The Serviceengine soon indicator lightilluminates when the ignition is firstturned to the ON position to checkthe bulb and to ind

Page 14

passenger seat. The air curtain was designed to inflate between the sidewindow area and occupant to further enhance the head protectionprovided to occ

Page 15

A difficulty with the system is indicated by one or more of the following:• The readiness light (same light as for front airbag system) will eitherfla

Page 16

or younger and who weigh 40 lb. [18 kg] or less) ride in your vehicle, youmust put them in safety seats made especially for children. Many statesrequi

Page 17 - Entertainment Systems

Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips and the kneesbend

Page 18

• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo

Page 19

Move a child to a different seating location if the shoulder beltdoes not stay positioned on the shoulder during use.Follow all instructions provided

Page 20

• Place seat back in upright position.• Put the safety belt in the automatic locking mode. Refer to Automaticlocking mode (passenger side front and ou

Page 21

1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan

Page 22

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

Page 23

8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m

Page 24

Driving a vehicle with the brake system warning light on isdangerous. A significant decrease in braking performance mayoccur. It will take you longer

Page 25

2. Slide the tongue up the webbing.3. While holding both shoulder andlap portions next to the tongue,route the tongue and webbingthrough the child sea

Page 26

5. While pushing down with yourknee on the child seat pull up onthe shoulder belt portion to tightenthe lap belt portion of thecombination lap and sho

Page 27

The tether strap anchors in yourvehicle are in the following positions(shown from top view, left is frontof the vehicle):Attach the tether strap only

Page 28

7. Tighten the child safety seat tether strap according to themanufacturer’s instructions.If the safety seat is not anchored properly, the risk of a c

Page 29

The LATCH anchors are located onthe rear section of the seat cushion,at the bottom of the seatback.Follow the child seat manufacturer’sinstructions to

Page 30

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli

Page 31

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o

Page 32 - Climate Controls

Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr

Page 33

Under-inflation is the most common cause of tire failures andmay result in severe tire cracking, tread separation or ⬙blowout⬙,with unexpected loss of

Page 34

Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo

Page 35

Engine coolant temperature:Illuminates when the engine coolanttemperature is high. Stop thevehicle as soon as possible, switch off the engine and let

Page 36

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

Page 37

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

Page 38

When mounting replacement tires and wheels, you should notexceed the maximum pressure indicated on the sidewall of thetire to set the beads without ad

Page 39

• Do not run over curbs or hit the tire against a curb when parkingIf your vehicle is stuck in snow, mud, sand, etc., do not rapidlyspin the tires; sp

Page 40

• Front Wheel Drive (FWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can be corrected by rotating the tires.Note: If your tir

Page 41

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

Page 42

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

Page 43

12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u

Page 44 - Driver Controls

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Page 45

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

Page 46

AdvanceTrac™/TractionControl™ system (if equipped):Illuminates when the TractionControl™ is turned OFF and willflash when active. If the lightremains

Page 47

vehicle placard or tire inflation pressure label. (If your vehicle has tiresof a different size than the size indicated on the vehicle placard or tire

Page 48

Changing tires with TPMSEach road tire is equipped witha tire pressure sensor fastenedto the inside rim of the wheel.The pressure sensor is coveredby

Page 49

When you believe your system is not operating properlyThe main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air.

Page 50

Low TirePressureWarning LightPossiblecauseCustomer Action RequiredFlashing WarningLightSpare tire inuseYour temporary spare tire is inuse. Repair the

Page 51

any tire is under-inflated, carefully drive the vehicle to the nearestlocation where air can be added to the tires. Inflate all the tires to therecomm

Page 52

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loadweight is als

Page 53

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

Page 54

Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o

Page 55

The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w

Page 56

TRAILER TOWINGNever tow a trailer with this vehicle. Your vehicle is notequipped to tow. No towing packages are available through anauthorized dealer.

Page 57

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

Page 58

STARTINGPositions of the ignition1. LOCK, locks the steering wheel,automatic transaxle gearshift leverand allows key removal.2. OFF, shuts the engine

Page 59

If you smell exhaust fumes inside your vehicle, have your dealerinspect your vehicle immediately. Do not drive if you smellexhaust fumes.Important saf

Page 60

• Make sure the gearshift is in P(Park).If starting a vehicle with a manualtransaxle:1. Make sure the parking brake isset.2. Push the clutch pedal to

Page 61

Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START).2. Turn the key to 4 (START), thenrelease the key as soon as theengin

Page 62 - Locks and Security

Failure to follow engine block heater instructions could result inproperty damage or physical injury.To reduce the risk of electrical shock, do not us

Page 63

• Finally, have the engine block heater system checked during your falltune-up to be sure it’s in good working order.How to use the engine block heate

Page 64

Using ABSWhen hard braking is required, apply continuous force on the brakepedal; do not pump the brake pedal since this will reduce theeffectiveness

Page 65

Always set the parking brake fully and make sure that thegearshift is securely latched in P (Park) (automatictransmission) or in 1 (First) (manual tra

Page 66

The Traction Control™ switch islocated on the instrument panel.The Traction Control™ system willautomatically turn on every time theignition is turned

Page 67

• loose or worn steering components• improper steering alignmentA high crown in the road or high crosswinds may also make the steeringseem to wander/p

Page 68

Odometer: Registers the total miles(kilometers) of the vehicle.If equipped with a message center,refer to Message center in theDriver Controls chapter

Page 69

Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve

Page 70

To put your vehicle in gear:• Start the engine• Depress the brake pedal• Move the gearshift lever into the desired gearTo put your vehicle in P (Park)

Page 71

D (Drive) without OverdriveOverdrive can be deactivated bypressing the transmission controlswitch on the side of the gearshiftlever.• This position al

Page 72

If necessary, try turning the Traction Control™ system off. This willallow the wheels to spin, which may help to free your stuck vehicle. Formore info

Page 73

Recommended shift speedsDo not downshift into 1 (First) when your vehicle is movingfaster than 15 mph (24 km/h). This will damage the clutch.Upshift a

Page 74

Removing the keyTurn the ignition to position 1 (LOCK) and remove the key.DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable

Page 75

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Page 76

Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•

Page 77

HAZARD FLASHER CONTROLThe hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ign

Page 78

FUSES AND RELAYSFusesIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinth

Page 79

AUDIO SYSTEMSAM/FM/single CD/in-dash CD6/MP3 satellite compatible soundsystemDriving while distracted can result in loss of vehicle control,accident a

Page 80

To remove a fuse, use the fuse puller tool provided on the powerdistribution box cover located in the engine compartment.The fuses are coded as follow

Page 81

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description13 5A SYNC14 — Not used15 10A Recirculated Air, Air Conditioning16 — Not us

Page 82

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description42 — Not used43 10A Instrument Cluster, Heated Seats(Run/Accessory)44 — Not

Page 83

To remove a fuse, use the fuse puller tool provided on the powerdistribution box cover.The high-current fuses are coded as follows:Fuse/RelayLocationF

Page 84

Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription19 — Spare20 — A/C clutch relay21A Rear defrost relay21B — Not used21C — Blower relay

Page 85

CHANGING A FLAT TIREIf you get a flat tire while driving:• do not brake heavily.• gradually decrease the vehicle’s speed.• hold the steering wheel fir

Page 86

If you have a dissimilar spare tire/wheel, then it is intended fortemporary use only. This means that if you need to use it, you shouldreplace it as s

Page 87

• Use commercial car washing equipment• Use snow chains on the end of the vehicle with the dissimilar sparetire/wheelThe usage of a full-size dissimil

Page 88

Tire change procedureWhen one of the front wheels is off the ground, the transaxlealone will not prevent the vehicle from moving or slipping off theja

Page 89

3. If equipped with a 6-spoke wheelcover that’s bolted on, remove thefour plastic nuts by turningcounterclockwise 1/4 turn for accessto the lug nuts.N

Page 90

Note: Your vehicle is equipped witha unique audio system. If yourdisplay shows six small circles in thedisplay, your audio system is a CD6system. If n

Page 91

To lessen the risk of personal injury, do not put any part of yourbody under the vehicle while changing a tire. Do not start theengine when your vehic

Page 92

1. Air compressor (inside)2. Diverter knob3. On/Off switch4. Air pressure gauge5. Sealant bottle/canister6. Sealant filling clear tube7. Sealant tube

Page 93

General informationFailure to follow these guidelines could result in an increasedrisk of loss of vehicle control, injury or death.Do not attempt to r

Page 94

• Never leave the temporary mobility kit unattended when it isoperating.• Sealant compound contains latex. Make sure that you use thenon-latex gloves

Page 95

Do not remove any foreign object that has pierced the tire. If a punctureis located in the tire sidewall, stop and call roadside assistance.1. Remove

Page 96

8. Inflate the tire to the pressurelisted on the tire label located onthe driver’s door or the door jamarea.Note: When the sealing compound is first a

Page 97

Second stage: Checking tire pressureCheck the air pressure of your tires as follows:1. Remove the valve cap from the tire valve.2. Unhook the black ho

Page 98

Note: After the sealing compound has been used, the maximum vehiclespeed is 50 mph (120 km/h) and the maximum driving distance is120 miles (200 km). T

Page 99

3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealantcanister.Installation

Page 100 - Seating and Safety Restraints

2. Once aligned, seat the sealantcanister by lightly pushing downuntil you hear an audible click.3. Wrap the clear tube around thecompressor housing.N

Page 101

TREBLE: Press SOUND repeatedly to reach the treble setting. PressSEEK/TRACK to adjust the level of treble.BALANCE: Press SOUND repeatedly to reach the

Page 102

When a wheel is installed, always remove any corrosion, dirt orforeign materials present on the mounting surfaces of the wheelor the surface of the wh

Page 103

Preparing your vehicleWhen the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a

Page 104

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat

Page 105

4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarbureto

Page 106

Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa

Page 107

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

Page 108

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

Page 109

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

Page 110

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

Page 111

In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a

Page 112

Seating and Safety Restraints 75Seating 75Safety restraints 82Airbags 96Child restraints 111Tires, Wheels and Loading 125Tire information 125Tire infl

Page 113

6. MENU: Press repeatedly toaccess the following features:SATELLITE RADIO MENU (if equipped): Press MENU when satelliteradio mode is active to access.

Page 114

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh

Page 115

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

Page 116

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

Page 117

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

Page 118

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:

Page 119

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

Page 120

WAXING• Wash the vehicle first.• Do not use waxes that contain abrasives; use Motorcraft PremiumLiquid Wax (ZC-53-A), which is available from your aut

Page 121

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal.When washing:• Take care when u

Page 122

PLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your authorized dealer.• For r

Page 123

INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENSClean the instrument panel, interior trim areas and cluster lens with aclean and damp white cotton clot

Page 124

• ENABLE ALERTS / DISABLE ALERTS: Press OK to enable/disablethe satellite alert status which alerts you when your selected songs areplaying on a satel

Page 125 - Tires, Wheels and Loading

• If grease or tar is present on the material, spot-clean the area firstwith Motorcraft Spot and Stain Remover (ZC-14). In Canada, useMotorcraft Multi

Page 126

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

Page 127

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

Page 128

Working with the engine on• Automatic transmission:1. Set the parking brake and shift to P (Park).2. Block the wheels.• Manual transmission:1. Set the

Page 129

2. Go to the front of the vehicle andlocate the auxiliary latch centeredunder the front of the hood andthen release it by pushing theauxiliary latch t

Page 130

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT2.0L I4 Engine1. Engine oil filler cap2. Brake/Clutch fluid reservoir3. Power Distribution box4. Batte

Page 131

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Page 132

Poor wiper quality can be improved by cleaning the wiper blades and thewindshield, refer to Windows and wiper blades in the Cleaningchapter.To prolong

Page 133

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap

Page 134

Ford production and aftermarket (Motorcraft) oil filters are designed foradded engine protection and long life. If a replacement oil filter is usedtha

Page 135

SHUFFLE: Press MENU until SHUFFLE ON/OFF appears in the display.UseSEEK/TRACK to toggle ON/OFF. If you wish to engageshuffle mode right away, pressSEE

Page 136

When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a

Page 137

If the battery has been disconnected or a new battery has been installed,the clock and the preset radio stations must be reset once the battery isreco

Page 138

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

Page 139

Note: Use of Motorcraft Cooling System Stop Leak Pellets or anequivalent product meeting Ford specification WSS-M99B37-B6, maydarken the color of Moto

Page 140

2. When the engine is cool, wrap a thick cloth around the coolantpressure relief cap on the coolant reservoir (a translucent plastic bottle).Slowly tu

Page 141

Fill your engine coolant reservoir as outlined in Adding engine coolantin this section.Severe climatesIf you drive in extremely cold climates (less th

Page 142

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperature gauge will move to the red (hot)area.• The “Service Engin

Page 143

FUEL FILTERFor fuel filter replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchangin

Page 144

• Automotive fuels can be harmful or fatal if swallowed. Fuel such asgasoline is highly toxic and if swallowed can cause death or permanentinjury. If

Page 145

RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr

Page 146

11. AM/FM: Press repeatedly toselect AM/FM1/FM2 frequency band.12. SEEK/TRACK: In radio mode,pressSEEK/TRACK toaccess the previous/next strongradio st

Page 147

At the next opportunity, safely pull off of the road, remove the fuel fillercap, align the cap properly and reinstall it. The check fuel caplightor “c

Page 148

Your vehicle was not designed to use fuel or fuel additives with metalliccompounds, including manganese-based additives. Studies indicate thatthese ad

Page 149

Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the RightF

Page 150 - USA (fus)

The amount of usable fuel in the empty reserve varies and shouldnot be relied upon to increase driving range. When refueling yourvehicle after the fue

Page 151

Driving style — good driving and fuel economy habitsGive consideration to the lists that follow and you may be able to changea number of variables and

Page 152

• Carrying unnecessary weight may reduce fuel economy (approximately1 mpg [0.4 km/L] is lost for every 400 lb [180 kg] of weight carried).• Adding cer

Page 153

If other than Ford, Motorcraft or Ford-authorized parts are used formaintenance replacements or for service of components affectingemission control, s

Page 154

2. Poor fuel quality or water in the fuel—the engine may misfire or runpoorly.3. The fuel cap may not have been securely tightened. See Fuel fillercap

Page 155

The OBD-II system is designed to check the emission control systemduring normal driving. A complete check may take several days. If thevehicle is not

Page 156

BRAKE/CLUTCH FLUIDBrake and clutch systems are supplied from the same reservoir.The fluid level will drop slowly asthe brakes wear, and will rise when

Page 157

Refer to Satellite radio menu under MENU for further information onselecting a satellite radio category.14. ON/OFF/VOL (Volume): Pressto turn ON/OFF.

Page 158

6. Install the dipstick making sure it is fully seated in the filler tube.7. Remove the dipstick and inspect the fluid level. The fluid should be inth

Page 159

If an overfill occurs, excess fluidshould be removed by an authorizeddealer.An overfill condition oftransmission fluid may causeshift and/or engagemen

Page 160

Changing the air filter element (Non PZEV only)1. Release the clamps that securethe air filter housing cover.2. Carefully separate the two halvesof th

Page 161

MOTORCRAFT PART NUMBERSComponent 2.0L I4 engineAir filter element FA-18901Fuel filter FG-1036Oil filter FL-9102Battery BXT-96RTemporary mobility kit r

Page 162

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord Part Name orEquivalentFord Part Number /Ford SpecificationBrake fluid and (clutchfl

Page 163

Item CapacityFord Part Name orEquivalentFord Part Number /Ford SpecificationCooling system stopleak pellets—Motorcraft CoolingSystem Stop Leak Pellets

Page 164

ENGINE DATAEngine 2.0L I4 engineCubic inches 121Required fuel 87 octaneFiring order 1–3–4–2Ignition system C.O.PCompression ratio 10.0 :1Spark plug ga

Page 165

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

Page 166 - Roadside Emergencies

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

Page 167

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

Page 168

one digit, press OK and the system will go to that satellite channel. Ifyou enter three digits, the system will automatically go to that channel, ifav

Page 169

Peace of mindMobile-Ease™ hands free communication systemRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the foll

Page 170

AAir cleaner filter ...241–243Air conditioningmanual heating and airconditioning system ...32Airbag supplemental restraintsy

Page 171

instrument panel ...209interior ...209plastic parts ...208washing ...

Page 172

Fan, Engine Cooling ...212, 215Floor mats ...61Fluid capacities ...244Foglamps ...

Page 173

daytime running light ...36fog lamps ...35headlamps ...35headlamps, flash to

Page 174

Safety Canopy ...105Safety defects,reporting ...203–204Safety restraints ...82, 85–90Belt-

Page 175

UUSB port ...27VVehicle Identification Number(VIN) ...247Vehicle loading ...

Page 176

Your vehicle is equipped with an Auxiliary Input Jack (AIJ). TheAuxiliary Input Jack provides a way to connect your portable musicplayer to the in-veh

Page 177

2. Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio in your audiosystem as this w

Page 178

GENERAL AUDIO INFORMATIONRadio frequencies:AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio

Page 179

Audio system warranty and serviceRefer to the Warranty Guide for audio system warranty information. Ifservice is necessary, see your dealer or qualifi

Page 180

Maintenance and Specifications 212Engine compartment 215Engine oil 217Battery 219Engine coolant 221Fuel information 227Air filter(s) 241Part numbers 2

Page 181

Note: SIRIUS reserves the unrestricted right to change, rearrange, addor delete programming including canceling, moving or adding particularchannels,

Page 182

Radio Display Condition Action RequiredNO TEXT Artist informationnot available.Artist information notavailable at this time onthis channel. The system

Page 183

MANUAL HEATING AND AIR CONDITIONING SYSTEM1.Fan speed adjustment: Controls the volume of air circulated inthe vehicle.2.RRear defroster: Press to acti

Page 184

9. Temperature control: Controls the temperature of the airflow in thevehicle.10.Passenger heated seat control (if equipped): Press toactivate/deactiv

Page 185

For maximum cooling performance in MAX A/C mode:1. Select MAX A/C.2. Move temperature control selector to the coolest setting.3. Set the fan to the hi

Page 186

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Fog la

Page 187

Flash to passPull toward you slightly to activateand release to deactivate.Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a redu

Page 188

AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident the alignment of yo

Page 189

5. Locate the vertical adjuster oneach headlamp, then usea7mmAllen wrench or a Phillipsscrewdriver to adjust the headlampup or down.6. HORIZONTAL AIM

Page 190

Illuminates 4 footwells and 3cupholders with a choice of 7 colors.The ambient lighting control switchis located on the instrument panel.To activate, p

Page 191

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Page 192

Replacing the interior bulbsCheck the operation of all bulbs frequently.Replacing exterior bulbsCheck the operation of all the bulbs frequently.Replac

Page 193

Replacing front parking lamp/turn signal bulbs1. Make sure the headlamp controlis in the OFF position and open thehood.2. Remove two push pins from th

Page 194

5. Remove the bulb socket from thelamp assembly by turningcounterclockwise.6. Pull the bulb straight out of thesocket.Install the new bulb in reverseo

Page 195

Replacing license plate lamp bulbs1. Make sure the headlamp switch isin the OFF position.2. Remove the two screws and thelens from the license plate l

Page 196

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Page 197 - Customer Assistance

TILT STEERING WHEELTo adjust the steering wheel:1. Pull the lever down to unlock thesteering column.2. While the lever is in the downposition, move th

Page 198

To prevent the fuse from being blown, do not use the power point(s)over the vehicle capacity of 12 VDC/180W. If the power point or cigarlighter socket

Page 199

Press and pull the window switchesto open and close windows.• Push down (to the first detent)and hold the switch to open.• Pull up (to the first deten

Page 200

Automatic dimming interior rear view mirror (if equipped)With Voice activated SYNCsystemYour vehicle may be equipped withan interior rear view mirror

Page 201

Heated mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not remove ice

Page 202

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

Page 203

Note:• Vehicle speed may vary momentarily when driving up and down asteep hill.• If the vehicle speed increases above the set speed on a downhill, you

Page 204

Increasing speed while using speed controlThere are three ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspee

Page 205 - Cleaning

Turning off speed controlThere are two ways to turn off thespeed control:• Press the speed control OFFcontrol.• Turn OFF the ignition.Note: When you t

Page 206

In AM, FM1, or FM2 mode:• Pressto access thenext/previous preset station.In Satellite radio mode (ifequipped):• Pressto advancethrough preset channels

Page 207

Before operating the moon roof you should verify that it is freeof obstructions and ensure that children and/or pets are not inthe proximity of moon r

Page 208

Do not let children play with the moon roof or leave childrenunattended in the vehicle. They may seriously hurt themselves.Relearning function: In cas

Page 209

Info menuThis control displays the followingcontrol displays:• Trip Odometer A or B• Distance to Empty• Average Fuel Economy• Instantaneous Fuel Econo

Page 210

2. Record the highway fuel economy for future reference.It is important to press the RESET control after setting the speedcontrol to get accurate high

Page 211

System checkSelecting this function from theSETUP menu causes the messagecenter to cycle through each of thesystems being monitored. For eachof the mo

Page 212

1. To disable/enable the autounlockfeature, select this function from theSETUP control for the currentdisplay mode.2. Press the RESET control switchto

Page 213

Please read the section Airbag supplemental restraint system(SRS) in the Seating and Safety Restraints chapter. Failure tofollow the specific warnings

Page 214

Warnings StatusDriver door ajar Warning cannot be resetPassenger door ajarRear left door ajar (ifequipped)Rear right door ajar (ifequipped)Park brake

Page 215

LOW TIRE PRESSURE. Displayed when one or more tires on yourvehicle have low tire pressure. Refer to Inflating your tires in the Tires,Wheels and Loadi

Page 216

KEYSThe key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency.If

Page 217

The autolock feature repeats when:• any door is opened then closed while the ignition is in the 3 (ON)position and the vehicle speed is 9 mph (15 km/h

Page 218

7. Turn the ignition to the 1 (LOCK) position. The horn will chirp onceto confirm the procedure is complete.Autounlock feature (if equipped)The autoun

Page 219

4. Press the power door unlock control on the door panel three times.5. Turn the ignition back to the 3 (RUN) position. The horn will chirpone time to

Page 220

To open the luggage compartmentdoor (lid) from within the luggagecompartment, pull the illuminated“T” shaped handle and push up onthe trunk lid. The h

Page 221

REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the fo

Page 222

2. With the all-door remote entry, press and release again withinthree seconds to unlock all the doors.The remote entry system activates the illuminat

Page 223

Sounding a panic alarmPressto activate the alarm. Press the control again, or turn theignition to the 3 (ON) position to deactivate.Note: The panic al

Page 224

Cell phone useThe use of Mobile Communications Equipment has become increasinglyimportant in the conduct of business and personal affairs. However,dri

Page 225

4. Insert the new battery. Refer to the diagram inside the remote entrytransmitter for the correct orientation of the battery. Press the batterydown t

Page 226

SECURILOCK™ PASSIVE ANTI-THEFT SYSTEMSecuriLock™ passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent

Page 227

Replacement keysIf your keys are lost or stolen and you don’t have an extra coded key,you will need to have your vehicle towed to an authorized dealer

Page 228

7. Turn the ignition to the 2 (OFF) position.8. Remove the previously programmed coded key from the ignition.9. Within twenty seconds of removing the

Page 229

Disarming the systemYou can disarm the system by any of the following actions:• Unlock the doors by pressing thecontrol on your remote entrytransmitte

Page 230

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Page 231

To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint bypulling up o

Page 232

To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Press and ho

Page 233

To minimize the risk of neck injury in the event of a crash, headrestraints must be installed properly.Adjusting the front manual seatSitting improper

Page 234

Pull up on the control (if equipped)to raise the seat and push down onthe control to lower the seat.Lift the control to adjust the angleof the seatbac

Page 235

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Page 236

Heated seats (if equipped)Persons who are unable to feel pain to the skin because ofadvanced age, chronic illness, diabetes, spinal cord injury,medica

Page 237

Tip/slide front seat (if equipped)Lift the control and fold theseatback forward.The seat can be slid forward toallow easier entry to the rear seats.Sl

Page 238

SAFETY RESTRAINTSPersonal Safety System™The Personal Safety System™ provides an improved overall level offrontal crash protection to front seat occupa

Page 239

Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ

Page 240

The front passenger sensing system can automatically turn off thepassenger front airbag. The system is designed to help protect small(child size) occu

Page 241

The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety

Page 242

In a rollover crash, an unbelted person is significantly more likelyto die than a person wearing a seat belt.Each seating position in your vehicle has

Page 243

Energy management feature• This vehicle has a safety belt system with an energy managementfeature at the front outboard seating positions to help furt

Page 244

How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt

Page 245

Safety belts with locking cinch tongue (rear center position only)The locking cinch tongue will slide up and down the belt webbing whenthe belt is in

Page 246

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

Page 247

Each seating position in your vehicle has a specific safety beltassembly which is made up of one buckle and one tongue thatare designed to be used as

Page 248

Safety belt extension assemblyIf the safety belt is too short when fully extended, there is a 8 inch(20 cm) safety belt extension assembly that can be

Page 249 - Accessories

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

Page 250

If... Then...The driver’s and front passenger’ssafety belts are buckled before theignition switch is turned to the ONposition or less than 1-2 minutes

Page 251

Reasons given... Consider...“Belts are uncomfortable” We design our safety belts to enhancecomfort. If you are uncomfortable -try different positions

Page 252

Do not sit on top of a buckled safety belt or insert a latchplateinto the buckle to avoid the Belt-Minder威 chime. To do so mayadversely affect the per

Page 253

2. Wait until the safety belt warning light turns off (Approximately 1minute).• Step 3 must be completed within 50 seconds after the safety beltwarnin

Page 254

Airbags DO NOT inflate slowly or gently, and the risk of injuryfrom a deploying airbag is the greatest close to the trim coveringthe airbag module.Imp

Page 255

Do not put anything on or over the airbag module. Placingobjects on or over the airbag inflation area may cause thoseobjects to be propelled by the ai

Page 256

How does the airbag supplemental restraint system work?The airbag SRS is designed toactivate when the vehicle sustainslongitudinal deceleration suffic

Modèles reliés 2008 Flex v.1

Commentaires sur ces manuels

Pas de commentaire