Ford 2008 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 93)

4. Rotate the bulb socket

counterclockwise and remove it

from the lamp assembly.

5. Pull the bulb straight out of the

socket.

Reverse steps to reinstall bulb(s).

Replacing fog lamp bulbs

1. Make sure the headlamp switch is

in the OFF position.

2. Remove the bulb socket from the

fog lamp by turning it

counterclockwise.

3. Disconnect the electrical

connector.

Reverse steps to reinstall bulb(s).

Replacing license plate lamp bulbs

The license plate bulbs are located

behind the rear bumper. To change

the license plate lamp bulbs:

1. Reach behind the rear bumper to

locate the bulb.

2. Twist the bulb socket

counterclockwise and carefully pull

to remove it from the lamp

assembly.

3. Pull out the old bulb from the

socket and push in the new bulb.

4. Install the bulb socket in lamp assembly by turning it clockwise.

2008 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 107 108

Pas de commentaire

Ford 2008 Explorer Sport Trac v.1 Manuel d'utilisateur Page 93