Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 83)

Compass display

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone/calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone/calibration adjustment.

Note: Compass zone and calibration adjustments can be entered by

using the INFO and SETUP MENU controls or using the reset button on

top of the compass sensor mounted behind the mirror.

Compass zone adjustment

1. Determine your magnetic zone by

referring to the zone map.

2. Turn ignition to the ON position.

3. Start the engine.

4. From SETUP menu, select

compass zone.

5. Press RESET control until the

message center display changes to

show the current zone setting (XX).

123

6 7 8 9 1011

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 83