Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 272)

Battery posts, terminals and related accessories contain lead and

lead compounds. Wash hands after handling.

Because your vehicle’s engine is electronically controlled by a computer,

some control conditions are maintained by power from the battery. When

the battery is disconnected or a new battery is installed, the engine must

relearn its idle and fuel trim strategy for optimum driveability and

performance. To begin this process:

1. With the vehicle at a complete stop, set the parking brake.

2. Put the gearshift lever in P (Park), turn off all accessories and start

the engine.

3. Run the engine until it reaches normal operating temperature.

4. Allow the engine to idle for at least one minute.

5. Turn the A/C on and allow the engine to idle for at least one minute.

6. Drive the vehicle to complete the relearning process.

• The vehicle may need to be driven to relearn the idle and fuel trim

strategy.

• If you do not allow the engine to relearn its idle trim, the idle

quality of your vehicle may be adversely affected until the idle

trim is eventually relearned.

When the battery is disconnected or a new battery installed, the

transmission must relearn its adaptive strategy. As a result of this, the

transmission may shift firmly. This operation is considered normal and

will not affect function or durability of the transmission. Over time the

adaptive learning process will fully update transmission operation to its

optimum shift feel.

If the battery has been disconnected or a new battery has been installed,

the clock and the preset radio stations must be reset once the battery is

reconnected.

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

272

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 272