Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 240)

Stowing the jack and tools

1. Unblock the wheels.

2. Stow the wheel ornament (if removed) in a safe location in the vehicle

(such as the glove box or jack stowage compartment) so it will not

become damaged. Re-install the wheel ornament onto the wheel once the

tire is repaired or replaced.

3. Stow the jack and tools in their respective locations, making sure they

are fully secured so they do not rattle when you drive.

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque at 50–100 miles (80–160 km)

after any wheel disturbance (rotation, flat tire, wheel removal, etc.).

Lug nut socket

size/Bolt size

Wheel lug nut torque*

lb.ft. N•m

Lug nut socket size:

⁄

” (19 mm) hex

Bolt size:

⁄

x20

100 135

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

When a wheel is installed, always remove any corrosion, dirt or

foreign materials present on the mounting surfaces of the wheel

or the surface of the wheel hub, brake drum or brake disc that

contacts the wheel. Ensure that any fasteners that attach the rotor to

the hub are secured so they do not interfere with the mounting

surfaces of the wheel. Installing wheels without correct metal-to-metal

contact at the wheel mounting surfaces can cause the wheel nuts to

loosen and the wheel to come off while the vehicle is in motion,

resulting in loss of control.

Note: If there is corrosion on the area where the wheel contacts the

hub, apply a thin film of grease or anti-seize compound on that area.

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

240

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 240