Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 197)

Parking brake

Apply the parking brake whenever

the vehicle is parked. To set the

parking brake, press the parking

brake pedal down until the pedal

stops.

The BRAKE warning lamp in the

instrument cluster illuminates and

remains illuminated (when the

ignition is turned ON) until the

parking brake is released.

Always set the parking brake fully and make sure that the

gearshift is securely latched in P (Park).

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer.

The parking brake is not recommended to stop a moving vehicle.

However, if the normal brakes fail, the parking brake can be used to stop

your vehicle in an emergency. Since the parking brake applies only the

rear brakes, the vehicle’s stopping distance will increase greatly and the

handling of your vehicle will be adversely affected.

Pull the release lever to release the

brake. Driving with the parking

brake on will cause the brakes to

wear out quickly and reduce fuel

economy.

BRAKE

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

197

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 197