Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 123)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

Unbuckle the combination lap and shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

After any vehicle collision, the combination lap and shoulder belt

system at all passenger seating positions must be checked by an

authorized dealer to verify that the “automatic locking retractor”

feature for child seats is still functioning properly, in addition to other

checks for proper safety belt system function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the safety belt assembly “automatic locking retractor” feature or

any other safety belt function is not operating properly. In addition, all

safety belts should be checked for proper function. Failure to replace

the belt and retractor assembly could increase the risk of injury in

collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

right front passenger seating positions.

The safety belt pretensioner removes some slack from the safety belt

system at the start of a crash. The safety belt pretensioner uses the

same crash sensor system as the front airbags, seat-mounted side

airbags, and Safety Canopy娂 system (if equipped). When the safety belt

pretensioner deploys, the lap and shoulder belt are tightened.

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

123

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 123