Ford 2005 Freestar Manuel d'utilisateur

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 15Entertainment Systems 18AM/FM stereo 18AM/FM stereo with CD 20AM/FM stereo wi

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause extensive repairs. A wa

If any of the doors, the liftgate or the hood (if equipped with perimeteralarm) are not properly closed, the horn will make two quick chirps andthe pa

5. Snap the two halves back together.Note: Replacement of the battery will not cause the remote transmitterto become deprogrammed from your vehicle. T

9. Turn the ignition to the 3 (OFF) position after you have finishedprogramming all of the remote entry transmitters.10. The doors will lock, then unl

• Head lamps• Park lamps• Tail lampsThe system will automatically turn off if:• the vehicle is locked using the remote entry system, the keyless entry

Press to automatically move the driver seat, side view mirrors andadjustable pedals to the desired memory position.Associating the remote transmitter

The keypad can be operated with the factory set 5–digit entry code; thiscode is located:• on the owner’s wallet card in the glove box,• marked on the

Tips for setting codes:• The factory set code cannot be erased or changed.• The factory code will work even after you have set your own personalcodes.

• the ignition is in the 4 (ON) position,• the brake is pressed before reaching 5 mph (8 km/h), and• then the vehicle increases to more than 5 mph (8

1. Turn the ignition key to the 4 (ON) position.2. Press the power door unlock control three times.3. Turn the ignition key from the 4 (ON) position t

The following items may prevent the vehicle from starting:• Large metallic objects.• Electronic devices on the key chain that can be used to purchaseg

Check fuel cap: Illuminates whenthe fuel cap may not be properlyinstalled. Continued driving withthis light on may cause the Checkengine warning light

1. Insert the first previouslyprogrammed coded key into theignition and turn the ignition fromthe 3 (OFF) position to the 4 (ON)position [maintain ign

PERIMETER ALARM SYSTEM (IF EQUIPPED)The perimeter anti-theft system will warn you in the event of anunauthorized entry to your vehicle.If there is any

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Push control to lower head restraint.Adjusting the front manual seat (if equipped)Never adjust the driver’s seat or seatback when the vehicle ismoving

Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback.After returning the sea

Press the control to move the seatforward, backward, up or down.Heated seats (if equipped)To operate the heated seats:• Push the control located on th

Memory seats/sideview mirrors/adjustable pedals (if equipped)This system allows automaticpositioning of the driver seat,outside rearview mirrors, anda

The head restraints can be movedup and down by pulling up on thehead restraint.Push button to lower head restraint.Seat mounted cup holders (if equipp

The cupholder is designed to detach from the seat when subjected toheavy load. The cupholder can be reinstalled by returning to the closedposition.Use

• 2nd row bench seat (if equipped)Note: This seat can be movedforward to keep a child in aLATCH child restraint attachedto the LATCH anchors at thecen

Safety belt: Reminds you to fastenyour safety belt. A chime will alsosound to remind you to fasten yoursafety belt.Check transaxle: Illuminates whena

Accessing the third row seat with a second row bucket seatEnsure head restraint is in the fulldown position and seat is adjustedto full rear position

Continuing to lift the handle willtumble the seat forward, allowingeasier access to the third row seat.After entering the 3rd row seat,return the seat

Before returning the seatback to its original position, make surethat cargo or any objects are not trapped underneath theseatback. After returning the

Exiting the third row seatSecond row bucket seats (if equipped)Follow directions for accessing the third row seatSecond row bench seatTo exit the thir

Removal of second row seats from vehicle1. Place the front row seat in a forward position to allow the 2nd rowseat to be fully upright.2. Place the 2n

6. With the assist handle, pull theseat rearward.7. Remove the seat from vehicle.Second row bench seat1. Detach the lap/shoulder beltsfrom both sides

2. Find the clips attached near theends of the lap/shoulder belts.3. Clip the end of the belt to thestationary portion of the shoulderbelt coming out

4. Position seatback in full downposition.5. From behind seat pull straightback on the release handles locatedon each side of the seat, releasingthe r

2. Install seat onto rear pin of fronttub at a 30 to 45 degree angle.3. Rotate the seat forward until itlatches onto the front pin.4. Rotate seat rear

5. Operate recline lever and pushthe seat back upright.Ensure seat is latched to vehicle floor by pushing/pulling on seat.If not latched, the seat may

Traction Control娂 or AdvanceTrac威 active (if equipped):Illuminates when the Traction Control娂 is active, refer to the Drivingchapter for more informat

3. Lower back of seat onto the reartubs until both release controls latchinto place. Be sure that the seat islocked in place both front and back.Do no

2. If you plan to carry very largeobjects or items that might damagethe center lap/shoulder belt, detachthe belt from the seat. Use a key orseat belt

4. Store the belt in the housingfound on the ceiling by inserting thesmaller tongue in the slot provided.Note: The seat can be stowed withthe safety b

Important: If you don’t let go ofthe number 1 strap before the seatback folds completely, the seat maynot stow flat in the tub. Refer to thelabel atta

8. Pull the number 3 strap on the seat back to tumble seat all the way into the tub in the floor.Do not use the seat anchors as cargo tie downs.Unstow

2. To return the seat back to theseating position, pull the number 1strap, then while holding thenumber 1 strap, pull the number 3strap to raise the s

Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a collision.Ta

3. To return the seat, ensure seatlatching area is free of objects.Then, raise the seat off the liftgatescuff plate and push at the top ofthe seat bac

How does the Personal Safety System姟 work?The Personal Safety System娂 can adapt the deployment strategy of yourvehicle’s safety devices according to c

to the airbag when it begins to inflate. For some occupants, this occursbecause they are initially sitting very close to the airbag. For otheroccupant

Low washer fluid: Illuminates when the windshield washer fluid is low.• Without Message Center• With Message CenterDoor ajar: Illuminates when the ign

Front safety belt energy management retractorsThe front outboard safety belt energy management retractors allowwebbing to be pulled out of the retract

Never let a passenger hold a child on his or her lap while thevehicle is moving. The passenger cannot protect the child frominjury in a collision.All

Combination lap and shoulder belts1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until

Vehicle sensitive modeThis is the normal retractor mode, which allows free shoulder belt lengthadjustment to your movements and locking in response to

• Grasp the shoulder portion andpull downward until the entirebelt is pulled out.• Allow the belt to retract. As the belt retracts, you will hear a cl

Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safetybelt properly could re

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

• With Message CenterDisplays which bulb is burned out.Depress the RESET control to clear.High beams: Illuminates when thehigh beam headlamps are turn

• The gearshift is in P (Park) (automatic transmission)• The ignition switch is in the OFF position• The driver and front passenger safety belts are u

Do not use extensions to change the fit of the shoulder beltacross the torso.Safety belt maintenanceInspect the safety belt systems periodically to ma

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The airbag supplemental restraint system (SRS) is designed to work inconjunction with the safety belts to he

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.The National Highway Traffic Saf

Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

• diagnostic module.• and the electrical wiring which connects the components.The diagnostic module monitors its own internal circuits and thesuppleme

When the front passenger seat isoccupied and the sensing systemhas turned off the passenger’sfrontal airbag, the ⬙passenger airbagoff⬙ or ⬙pass airbag

Sitting improperly out of position or with the seat back reclinedtoo far can take off weight from the seat cushion and affect thedecision of the passe

Determining if the system is operationalThe supplemental restraint system uses a warning indicator in theinstrument cluster or a back-up tone to indic

Speedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature,

All occupants of the vehicle should always wear their safety beltseven when an airbag SRS is provided.How does the side airbag system work?The design

not of the type sufficient to cause activation. Side airbags are designedto inflate in side-impact collisions, not roll-over, rear-impact, frontal orn

Do not attempt to service, repair, or modify the Safety Canopy娂system, its fuses, the A, B, C or D pillar trim, or the headliner ona vehicle containin

• Two crash sensors located at the c-pillar behind the rear doors (oneon each side).• Rollover sensor in the restraints control module (RCM).The Safet

If the Safety Canopy娂 system has deployed, the SafetyCanopy娂 will not function again unless replaced. TheSafety Canopy娂 system (including the A, B, C,

or younger and who weigh 40 lb. [18 kg] or less) ride in your vehicle, youmust put them in safety seats made especially for children. Many statesrequi

Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips and the kneesbend

• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo

SAFETY SEATS FOR CHILDRENChild and infant or child safety seatsUse a safety seat that is recommended for the size and weight of thechild. Carefully fo

Carefully follow all of the manufacturer’s instructions includedwith the safety seat you put in your vehicle. If you do not installand use the safety

Trip odometer: Registers the miles (kilometers) of individual journeys.• Without Message CenterPress and release the button on thecluster to toggle be

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a

Attaching child safety seats with tether strapsMost new forward-facing child safety seats include a tether strap whichgoes over the back of the seat a

Front passenger seating position (manual adjusting seats only)1. Position the child safety seat onthe passenger seat cushion.2. Route the child safety

4. Rotate the tether hook, and clipthe tether strap to the seat frame.If the tether strap is clippedincorrectly (as shown) thechild safety seat may no

7. Tighten the child safety seattether strap according to themanufacturer’s instructions.Rear seating positionsFollow Steps 1–7 as described above for

For additional important safety information on the proper use of safetybelts, child seats and infant seats, please read the entire Seating andsafety r

The lower anchors for child seatinstallation are located at the rearsection of the rear seat between thecushion and seat back.Follow the child seat ma

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o

AM/FM STEREO SYSTEM (IF EQUIPPED)1./ Tuner: Press tomanually go up or down the radiofrequency. Also use in menu modeto select various settings.2. Audi

• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the

Inspecting your tiresPeriodically inspect the tire treads for uneven or excessive wear andremove stones, nails, glass or other objects that may be wed

maximum load can be carried by the tire. This pressure is normallyhigher than the manufacturer’s recommended cold inflation pressurewhich can be found

TIRE REPLACEMENT REQUIREMENTSYour vehicle is equipped with tires designed to provide a safe ride andhandling capability.Only use replacement tires and

Temporary spare tire informationYour vehicle may have a temporary spare tire. The temporary spare tirefor your vehicle is labeled as such. It is small

Dissimilar spare tire/wheel information (if equipped)Failure to follow these guidelines could result in an increasedrisk of loss of vehicle control, i

Location of the spare tire and toolsThe spare tire and tools for your vehicle are stowed in the followinglocations:Item LocationSpare tire Under the v

2. Turn the wrenchcounterclockwise until cable is slackand tire can be slid rearward.3. Remove the primary retainer fromthe center of the tire.Note: D

1. Park on a level surface, activatehazard flashers and set parkingbrake.2. Place gearshift lever in P (Park),turn engine off, and block thediagonally

If Ford Accessory Running Boardshave been installed, use the jackadapters supplied with the runningboards as described on the inside ofthe jack storag

3. Seek: Press to access thenext/previous strong station ortrack.4. Memory presets: To set astation: Select frequency bandAM/FM; tune to a station, pr

11. Remove the jack and fullytighten the lug nuts in the ordershown. Refer to Wheel lug nuttorque specifications later in thischapter for the proper l

4. Check that the flat tire is properly secured.Stowing the spare tire1. Lay the spare, inflated tire on the ground with the valve stem facingdown.2.

When a wheel is installed, always remove any corrosion, dirt orforeign materials present on the mounting surfaces of the wheelor the surface of the wh

4. R: Indicates a “radial” type tire.5. 15: Indicates the wheel or rim diameter in inches. If you change yourwheel size, you will have to purchase new

8. U.S. DOT Tire Identification Number (TIN): This begins with theletters “DOT” and indicates that the tire meets all federal standards. Thenext two n

13. Maximum Permissible Inflation Pressure: Indicates the tiremanufacturers’ maximum permissible pressure and/or the pressure atwhich the maximum load

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE CAREImproper or inadequate vehicle maintenance can also cause tires to wearabnormally. Here are some of the important maintenance items:Tire wear

Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t

Tire rotationRotating your tires at the recommended interval (as indicated in thescheduled maintenance information that comes with your vehicle) willh

Seating and Safety Restraints 112Seating 112Safety restraints 137Airbags 152Child restraints 164Tires, Wheels and Loading 178Tire Information 178Chang

AM/FM STEREO/ SINGLE CD SOUND SYSTEM (IF EQUIPPED)1./ Tuner: Press tomanually go up or down the radiofrequency. Also use in menu modeto select various

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can

When a tire loses inflation, the lowtire warning system detects thechange and illuminates the low tirewarning indicator light as shown.If the light re

Reset with message center:To reset turn the ignition to the ONposition, press the set up button onthe message center until “SYSTEMCHECK” is displayed.

SNOW TIRES AND CHAINSSnow tires must be the same size and grade as the tires youcurrently have on your vehicle.The tires on your vehicle have all weat

Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your authorized dealer plus any aftermarketequipment.Payload – is th

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAW (Gross Axle Weight) – is the total weight placed on each axle(front and rear) – including vehicle curb weight and all payload.GAWR (Gross Axle Wei

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o

The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w

Treble: Press to adjust the treble setting. Use / / SEEK .Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK .Fade: Pr

TRAILER TOWINGYour vehicle is capable either of towing Class I trailers or up to Class IItrailers when equipped with the optional trailer tow package.

Vehicle towing capability/Trailerhitch requirementTrailerModel/EngineGCWR-lb.(kg)Hitch typerequiredTrailerWeightrange - lb.(kg)Tongue loadVan, 3.9L700

Safety chainsAlways connect the trailer’s safety chains to the hook retainers on thehitch. To connect the trailer’s safety chains, cross the chains un

Driving while you towWhen towing a trailer:• Turn off the speed control. The speed control may shut offautomatically when you are towing on long, stee

RECREATIONAL TOWINGFollow these guidelines for your specific powertrain combination to towyour vehicle with all four wheels on the ground (such as beh

STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo

Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,

• Turn the key to 4 (ON) withoutturning the key to 5 (START).Make sure the corresponding lights illuminate or illuminate briefly. If alight fails to i

1. Turn the key to 5 (START)without pressing the acceleratorpedal and release as soon as theengine starts. The key will return to4 (ON).2. When the en

BRAKESOccasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-o

10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Selec

Brake Assist (if equipped as part of the AdvanceTrac姞 system)The Brake Assist system provides full braking force during panic brakingsituations. It de

vehicle does not respond to steering inputs, the system will attempt toincrease the turning response of the vehicle.AdvanceTrac威 enhances your vehicle

with a message center will also have CHECK ADVANCETRAC shown inthe display. Have the vehicle system serviced by an authorized dealerimmediately.If the

STEERINGTo prevent damage to the power steering system:• Never hold the steering wheel at its furthest turning points (until itstops) for more than a

When the key is in the 3 (OFF) position, the automatictransmission shift lever can be moved from the P (Park) positionwithout the brake pedal depresse

Understanding the gearshift positions of the 4–speed automatictransaxleP (Park)This position locks the transaxle and prevents the front wheels fromtur

1 (First)• Transaxle operates in first gear only.• Provides maximum engine braking.• Allows upshifts by moving gearshift lever.• Will not downshift in

To help avoid personal injury, always use caution when in R(Reverse) and when using the RSS.This system is not designed to prevent contact with small

The RSS is automatically enabledwhen the gear selector is placed inR (Reverse) and the ignition is ON.The park aid disable switch allowsthe driver to

GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program

PREMIUM IN-DASH SIX CD SOUND SYSTEM (IF EQUIPPED)1./ Tuner: Press tomanually go up or down the radiofrequency. Also use in menu modeto select various

Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will

This switch is located behind theservice panel on the right side ofthe cargo area.To reset the switch:1. Turn the ignition OFF.2. Check the fuel syste

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

The fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 Relay Accessory delay relay 12 Relay Acces

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description12 5A Brake-Shift Interlock (BSI) Runfeed, Climate control system Runfeed13

Power distribution boxThe power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that prot

The high-current fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description1 — Not used2 30A** Right cooling fan3 3

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description31 Micro relay Right trailer stop/turn lamps32 Mini relay Rear defroster40 15A* Engi

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description61 20A* Spare62 30A* SJB #3 – Right cornering/auxiliary lamps,Right low beam, Left f

Auxiliary relay box (cooling fans)The relay box is located in the engine compartment by the radiator.Fuse/RelaylocationFuse ampratingDescription1 — Co

Speed sensitive volume (if equipped): Radio volume automaticallychanges slightly with vehicle speed to compensate for road and windnoise. Press MENU t

Do not attempt to push-start your vehicle. Automatictransmissions do not have push-start capability; doing so maydamage the catalytic converter.Prepar

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat

4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarbureto

Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f

In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or

THE DISPUTE SETTLEMENT BOARD (U.S. ONLY)The Dispute Settlement Board is:• an independent, third-party arbitration program for warranty disputes.• avai

10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Selec

Board membershipThe Board consists of:• Three consumer representatives• An authorized dealer representativeConsumer candidates for Board membership ar

Oral presentationsIf you would like to make an oral presentation, indicate YES to question6 on the application. While it is your right to make an oral

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

• Do not allow paint sealant to come in contact with the sliding doorelectrical contact switches. Paint sealant or other contaminants couldinterfere w

• Do not spray a hot engine with cold water to avoid cracking theengine block or other engine components.• Spray Motorcraft Engine Shampoo and Degreas

• The windshield, rear windows and side windows may be cleaned witha non-abrasive cleaner such as Motorcraft Ultra-Clear Spray GlassCleaner (ZC-23), a

INTERIORFor fabric, carpets, cloth seats, safety belts and seats equipped with sideair bags:• Remove dust and loose dirt with a vacuum cleaner.• Remov

If a slot is not selected within 5 seconds, the radio shall eject the currentdisc. Press and hold for 2 seconds to auto eject all CDs present in thera

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide sc

OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel.2. Go to the front of th

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.9L/4.2L V6 engines1. Brake fluid reservoir2. Air filter assembly3. Power distribution box4. Battery5

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

3. Set the parking brake and ensure the gearshift is securely latched in P(Park).4. Open the hood. Protect yourself from engine heat.5. Locate and car

• If required, add engine oil to theengine. Refer to Adding engineoil in this chapter.• Do not overfill the enginewith oil. Oil levels above thismark

Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oil.Only use oils “Certified For Gasoline Engines” by t

BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.How

When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a

4. Menu: Press to toggle throughthe following modes:Treble: Press to adjust the treble setting. Use/ / SEEK .Bass: Press to adjust the bass setting. U

7. Drive the vehicle to complete the relearning process.• The vehicle may need to be driven 10 miles (16 km) or more torelearn the idle and fuel trim

• Boiling protection up to 265°F (129°C).• Protection against rust and other forms of corrosion.• Enables calibrated gauges to work properly.When the

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur

coolant degas system with a pressurized cap, or if it is necessary toremove the coolant pressure relief cap on the radiator of a vehicle withan overfl

Used engine coolant should be disposed of in an appropriatemanner. Follow your community’s regulations and standards for recyclingand disposing of aut

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautionsDo not overfill the fuel tank. The pressure in an overfilled tankmay cause leak

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek med

Use the following guidelines to avoid static build-up when filling anungrounded fuel container:• Place approved fuel container on the ground.• DO NOT

If you do not use the proper fuel filler cap, excessive pressure orvacuum in the fuel tank may damage the fuel system or causethe fuel cap to disengag

It should not be necessary to add any aftermarket products to your fueltank if you continue to use high quality fuel of the recommended octanerating.

6. Tape eject: Press to eject a tape.7. Text: In CD mode, displays tracktitle, artist name, and disc title (ifavailable).8. Shuffle: Press to play CD

ESSENTIALS OF GOOD FUEL ECONOMYMeasuring techniquesYour best source of information about actual fuel economy is you, thedriver. You must gather inform

Calculating fuel economy1. Fill the fuel tank completely and record the initial odometer reading(in miles or kilometers).2. Each time you fill the tan

• You may want to turn off the speed control in hilly terrain ifunnecessary shifting between third and fourth gear occurs.Unnecessary shifting of this

EPA window stickerEvery new vehicle should have the EPA window sticker. Contact yourauthorized dealer if the window sticker is not supplied with your

Exhaust leaks may result in entry of harmful and potentiallylethal fumes into the passenger compartment.Do not make any unauthorized changes to your v

soon light is on, refer to the description in the Warning lights andchimes section of the Instrument Cluster chapter. Your vehicle may notpass the I/M

BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the “MIN” and“

7. Remove the dipstick and inspect the fluid level. The fluid should be inthe designated areas for normal operating temperature.Low fluid levelDo not

Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and re

2. Loosen the hose clamp locatedclosest to the air cleaner.3. Remove the air cleaner assemblyfrom the vehicle.4. Release the two clamps thatsecure the

17. ON/OFF/Volume: Press to turnON/OFF. Turn to increase/decreasevolume.If the volume is set above a certainlevel and the ignition is turned off,the v

7. Install a new air filter element. Be careful not to crimp the filterelement edges between the air filter housing and cover.8. Replace the air filte

10. Ensure the pads on the bottomof the air cleaner assembly areproperly seated.11. Reconnect the outlet tube to theair cleaner assembly and tighten t

MOTORCRAFT PART NUMBERSComponent 3.9L OHV V6 engine 4.2L OHV V6 engineAir filter element FA-1679 FA-1679Battery BXT-59 BXT-59BXT-65-750 BXT-65-750Fuel

REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluid Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeFluid1All Fill to MAX lineon res

LUBRICANT SPECIFICATIONSItem Ford partnameFord partnumberFordspecificationBrake fluid MotorcraftHighPerformanceDOT 3 MotorVehicle BrakeFluid1PM-1 ESA-

Item Ford partnameFord partnumberFordspecificationLock cylinders MotorcraftPenetratingand LockLubricantXL-1 nonePower steeringfluidMotorcraftMERCON威AT

ENGINE DATAEngine 3.9 L OHV V6 engine 4.2L OHV V6 engineCubic inches 232 256Required fuel 87 octane 87 octaneFiring order 1-4-2-5-3-6 1-4-2-5-3-6Ignit

IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety ComplianceCertification

Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Plea

Transmission/Transaxle code designationsYou can find atransmission/transaxle code on theSafety Compliance CertificationLabel . The following table tel

Maintenance and Specifications 261Engine compartment 263Engine oil 264Battery 268Engine Coolant 270Fuel information 275Air filter(s) 292Part numbers 2

1. Volume: Press to /increase/decrease volume control.2. Media: Press to select fromdifferent playing medias.3./ : Press to activate dualplay mode and

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local authorized Ford

Rear seat entertainment systems - DVDAsh cup/coin holderTrailer hitches, wiring harnesses and accessoriesRoof carriersPeace of mindFirst aid and safet

AAccessory delay ...68AdvanceTrac ...220Air cleaner filter ...288, 292Air filter, cabin

wiper blades ...257Clock ...66Compass, electronic ...59calibration

Fluid capacities ...293Fuel ...275calculating fuel economy ...280cap ...

bulb replacementspecifications chart ...52daytime running light ...46headlamps ...45headlamps

Roadside assistance ...229Roof rack ...92SSafety Belt Maintenance ...151Safety belts (see Safe

fluid, refill capacities ...293lubricant specifications ...296Transmissionbrake-shift interlock (BSI) ...223fluid, checking and add

308

309

Dual play modePress/ on the rear seat audiocontrols or simultaneously press theradio preset controls 2 and 4 toenable/disable dual play.During dual pl

310

311

312

CASSETTE/PLAYER CAREDo:• Tighten very loose tapes by inserting a pen or pencil into the hole andturning the hub.• Remove loose labels before inserting

CD units are designed to play commercially pressed 4.75 in (12cm) audio compact discs only. Due to technical incompatibility,certain recordable and re

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Air flow sele

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

DUAL ZONE MANUAL HEATING AND AIR CONDITIONING SYSTEMWITH REAR PASSENGER COMPARTMENT CLIMATE CONTROL(IF EQUIPPED)1. Air flow selections: Controlsthe di

4. REAR Rear temperature control: Press to enable theauxiliary system and to set the desired rear cabin airflow temperaturewith the front control. The

• For maximum cooling performance (MAX A/C):In the MAX A/C mode:• Move the temperature control selector to the coldest setting.• Set the fan to the hi

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITH REARPASSENGER COMPARTMENT CLIMATE CONTROL (IF EQUIPPED)1.Defrost: Distributes outside air through the win

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

6. Recirculated air: Press to activate/deactivate air recirculationin the vehicle cabin. Recirculated air may reduce the amount of time tocool down th

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED SEATS AND REAR PASSENGER COMPARTMENTCLIMATE CONTROL (IF EQUIPPED)1.Defrost: Distributes outside air

7. :Distributes air through the windshield defroster vents and thefloor vents.8.: Distributes air through the floor vents.9.: Distributes air through

19. REAR: Press to enable the control located in the rear seat. Pressagain to turn the auxiliary system off.OPERATING TIPS• To reduce fog build up on

AUXILIARY CLIMATE CONTROL (IF EQUIPPED)1. Fan speed: Turn to select thedesired fan speed.2. Temperature/mode selection:The distribution of air from th

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Note:

Autolamps - Programmable exit delayProgrammable exit delay allows the length of the autolamp exit delay tobe changed. Once in the programming mode, th

High beamsPush the lever toward theinstrument panel to activate. Pullthe lever towards you to deactivate.Flash to passPull toward you slightly to acti

Your vehicle also contains a feature called “sleeping baby mode” — inwhich the dome lamps will remain off and only the lower lamps willilluminate. Thi

4. On the wall or screen you willobserve a light pattern with highintensity flat segments at the topedge of the pattern. If the flat edgesare not at t

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

INTERIOR LAMPSThe interior lights illuminate when:• any door is opened (and the operation switch is in the middleposition).• the instrument panel dimm

Dome lamps (if equipped)The front dome lamp is located overhead between the driver andpassenger seats.The dome lamp will stay on if thepanel dimmer co

Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbsmust be marked with an authorized “D.O.T.” for North America an

Replacing headlamp bulbsTo remove the headlamp bulb:1. Make sure headlamp switch is in the OFF position, then open thehood.2. Remove the two retainer

3. To remove the side marker bulb,turn the bulb socketcounterclockwise, and pull the bulbstraight out of the socket.4. To remove the parking/turnbulb,

Replacing license plate lamp bulbThe license plate bulbs are located in the license plate housing assemblyon the liftgate. To change the license plate

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Changing the wiper blades1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the lockpin manually to releas

ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp.Slide on rod featureRotate the visor towards the sidewindo

Electronic compass/temperature display (if equipped)The overhead console may have an electronic compass and outside airtemperature display. The compas

SPECIAL NOTICESEmission warrantyThe New Vehicle Limited Warranty includes Bumper-to-BumperCoverage, Safety Restraint Coverage, Corrosion Coverage, and

Zone variation mode1. Determine which magnetic zoneyou are in by referring to the zonemap.2. Turn the ignition to the ONposition.3. Press and hold the

Note: Look for a parking lot away from buildings, light posts, manholecovers, sewer and drainage grates and other metallic objects. Somemagnetic objec

In some cases it may be necessaryto have someone hold the doorwhile rear seat passengers areentering or exiting the vehicle. Thehold open mechanism wi

The Power Door Lockout Control islocated in the overhead console.With the control in the OFFposition, power operation is disabledfrom both PSD handles

To power close the PSD with the inside or outside release handle:• Manually pull the door about 6 inches in the desired direction oftravel. The power

Resetting the PSDThe power sliding door may operate incorrectly or not at all because ofthe following conditions:• a low voltage or dead battery• the

To open the sliding door when thechild safety lock is on:• Unlock the sliding door and openthe door from the outside.• Press the right or left handcon

Do not use the power point for operating the cigarette lighter element (ifequipped).To prevent the fuse from being blown, do not use the power point(s

Cigar/Cigarette lighter (if equipped)Do not plug optional electrical accessories into the cigarette lightersocket.Do not hold the lighter in with your

Power vent windowsThe power vent windows areoperated by a single switch locatedon the instrument panel. Press andhold the bottom of the switch toopen

Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.Please read the section Supplemental restraint

Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)The accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is

3. Press the SET + control andrelease it.4. Take your foot off the acceleratorpedal.5. The indicatorlight on theinstrument cluster will turn on.Note:•

• Use the accelerator pedal to get to the desired speed. When thevehicle reaches that speed press and release the SET + control.Reducing speed while u

STEERING WHEEL CONTROLS (IF EQUIPPED)RADIO CONTROL FEATURES• Press MEDIA to select AM, FM1,FM2, TAPE or CD (if equipped).In Radio mode:• Press SEEK to

Mobile Communication Equipment includes, but is not limited to cellularphones, pagers, portable email devices, in-vehicle communicationssystems, telem

Retain the original transmitter for use in other vehicles as well as forfuture programming procedures (i.e. new HomeLink威 equipped vehiclepurchase). I

5. Press and hold the just-trained HomeLink威 button and observe theindicator light. If the light is constant, programming is complete and yourdevice s

• Continue to press and hold the HomeLink威 button (note Step 3 in the“Programming” section) while you press and release — every twoseconds (“cycle”) y

2. The indicator light will begin to flash after 20 seconds. Withoutreleasing the HomeLink威 button, follow Step 2 in the “Programming”section.For ques

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-

Odometer/Trip OdometerRefer to Gauges in the Instrument Cluster chapter.Distance to empty (DTE)Selecting this function from theINFO menu estimates app

Trip elapsed drive timeSelect this function from the INFOmenu to display your trip elapseddrive time. When selected thedisplay will accumulate when th

3. Press and hold the RESETcontrol for 2 seconds to set thelanguage choice.Units (English/Metric)1. Select this function from theSETUP menu for the cu

System warningsSystem warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems.In the event of a multiple warning si

Liftgate ajar Warning returns after theignition key is turned from OFFto ONCheck left park lampCheck right park lampCheck left headlampCheck fuel capC

REDUCED ENGINE POWER. Displayed when the engine temperatureexceeds safe driving operating range and the vehicle limits engine powerto prevent engine d

CHANGE OIL SOON. Displayed when the engine oil life remaining is 5percent or less. When oil life left is between 5% and 0%, the CHANGEOIL SOON message

To reset the oil monitoring system to your personalized oil life %:1. Press the SETUP control toaccess the System Check function.2. Press and release

• Washer fluid• Brake FluidContact your authorized dealer as soon as possible if these messagesoccur on a regular basis.LIFTGATEUnlock the liftgate (b

Opening and Closing the PLG:The PLG controls will operate without having the key in the ignition. Thetransaxle must be in PARK to power operate the PL

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

To power open or close the PLGwith the Remote entrytransmitter:1. Press this control twice withinthree seconds to power open thePLG. The interior lamp

To operate the PLG manually:1. Disable the liftgate power function by placing the Power Door LockoutControl in the OFF position.2. Open and close the

Make sure the liftgate is closed to prevent exhaust fumes frombeing drawn into the vehicle. If you must drive with the liftgateopen, keep the climate

To adjust the cross-bar (if equipped) position:1. Loosen the thumbwheel at bothends of the cross-bar (bothcross-bars are adjustable).2. Slide cross-ba

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

The vehicle can still be locked, with the key in the ignition, using themanual lock button on the door, locking the driver’s door with a key, bysimult

• For vehicles without powerliftgate, pull the lock/unlock leverto the right (drivers side).• For vehicles with power liftgate,pull the lock/unlock le

• 3–button remote• 5–button remote• 6–button remoteThe remote entry system allows you to:• lock or unlock all vehicle doors and liftgate without a key

If there are problems with the remote entry system, make sure to takeALL remote entry transmitters with you to the authorized dealer inorder to aid in

Opening power liftgate (PLG) (if equipped)Press the control twice within three seconds to power open the powerliftgate. The interior lamps will illumi